Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Expertzone 3110
- Page 1 Expertzone PV-7451M Owner’s Manual Photo Tripod...
- Page 2 Thank you for choosing Expertzone. The Expertzone Tripod employs an adjustable center column that converts to a four-section monopod for enhanced flexibility. Telescoping legs with flip-locks offer fast and easy adjustments, with enclosed spiked feet for all-terrain shooting. The three- way pan and tilt head offers total control over camera positioning, and the quick-release plate is equipped with a 1/4”-20...
- Page 3 Opening the Tripod Loosen the pan handle and position it at an approximate 90° angle to the center column. Pull out each flip-lock, extend the legs to the desired height, and relock each leg. Note: Always extend the legs from the top flip-locks first. Rotate the spreader lock counterclockwise to release the center brace.
- Page 4 Note: Make sure the screwhead handle is flat against the bottom of the quick-release plate before placing it back on the tripod. Pull and hold on to the quick-release plate locking lever and insert the camera/ quick-release assembly into the tripod head. Using the Pan and Tilt Head Tip: Use the bubble levels to make sure your shot is parallel to the horizon.
- Page 5 Friction Control Friction control regulates the stiffness of the tilt feature. For less friction, rotate the knob counterclockwise. For more friction, rotate the knob clockwise. Adjusting the Center-Column Height Rotate the center- column locking knob counterclockwise to loosen. Adjust the center column to the desired height, and rotate the center-column locking...
- Page 6 Precautions • Safe operation of this product is the user’s responsibility. • Keep this product away from children. • The camera should be securely fastened to the quick- release mounting plate before mounting onto the tripod. • Never mount a camera to the tripod until all tripod legs are locked and stabilized.
Need help?
Do you have a question about the 3110 and is the answer not in the manual?
Questions and answers