TecScan FUNcaster Barometer Quick Start Manual

Custom Settings
Press BAR to choose Time or
Barometer
Press DOWN to choose
Fahrenheit or Celsius
Press UP to choose Barometric
Unit, inHg or hPa/mb.
Import ant Details
a) Removing batteries resets to Factory
Default settings.
b) To test temperature accuracy, place unit on
plastic or wood, near your home's HVAC
thermostat for about 4 hours.
c) Adjusting barometer will not affect 8-12
hour weather outlook calculation.
d) If FUNcaster becomes wet, promptly
remove batteries, pat dry, and place in warm
dry area for 48 hours. Restart as usual.
To Install FUNcaster
A. Remove battery cover (Note polarity)
insert 2 AAA batteries. Replace cover.
B. Install out of direct sunlight, high and
away from dark colors, protected from
rain and spray as possible.
C. Fully clean location surface before
attaching with nylon fastener.
HELP: 1-352-264-7877 or TECSCAN@TECSCAN.COM
WEBSITE: https://store.tecscan.com
FUNcaster
Range of Data Displayed:
Temperature: 32
Lo
= temps below 32
Hi
= temps above 140
Humidity: 10 % to 99 %
Barometer: 23.62 to 32.48 inHg, hPa/mb
10 or 20%: ISOLATED SHOWERS
30, 40, or 50%: SCATTERED SHOWERS
BAROMETRIC ALGORITHM
8-12 HOUR OUTLOOK
®
HELP: 1-352-264-7877 or TECSCAN@TECSCAN.COM
WEBSITE: https://store.tecscan.com
®
Barometer
o o
F/0 C to 140
o o
F/0 C
o o
F/60 C
NOAA RAIN (%) GUIDE
60 or 70%: SHOWERS LIKELY
o o
F/60 C