Advertisement
1. Outline
The M3062PT2-EPBM is an MCU board for replacing the emulation probe M3062PT-EPB or M3062PT2-EPB for the M16C/62
Group M16C/62P.
2. Components
Package components
M3062PT2-EPBM MCU board for replacing the M3062PT-EPB or M3062PT2-EPB
M3062PT2-EPBM User's Manual (for replacement) (This manual)
M3062PT2-EPBM User's Manual (for replacement) (Japanese)
3. Replacing the MCU Board
Procedure for replacing the MCU board is shown in Figure 3.1.
No mark,
or
"512" printed.
M3062PT2-EPBM (this product)
Figure 3.1 Replacing the MCU board
Note on Printing on This Product:
● "512" is printed on the corner of this product.
Description
"M3062PT-EPB" or
"M3062PT2-EPB" or label
should be on the rear panel.
PCA 7501 EPBA
M3062PT-EPBM
or
M3062PT2-EPBM
Screws ( x 4)
PCA7501EPBA
"512" should be printed
(1) Unscrew the four screws included with the emulation probe.
(2) Pull out the M3062PT-EPBM or M3062PT2-EPBM from the
PCA7501EPBA vertically, otherwise the connectors may be
damaged.
(3) Check that the "M3062PT-EPB" or "M3062PT2-EPB" label
is attached on the rear panel of the PCA7501EPBA.
(4) Attach connectors J1 and J2 of the M3062PT2-EPBM (this
product) to connectors J3 and J4 of the PCA7501EPBA,
respectively.
(5) Tighten the four screws in an even, crisscross pattern to
secure the M3062PT2-EPBM.
(6) After replacing the board, perform the self-check to make
sure that it is installed properly.
IMPORTANT
(2/4)
Quantity
1
1
1
Advertisement
