Advertisement
Available languages
Available languages
Read this first!
WARNING:
Before replacing the lamp unit, be sure to turn the power off and to dis-
connect the power plug from the wall outlet.
Electric shocks or explosions can result if this is not done.
z
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
z
Do not remove unspecified screws during the lamp unit replacement.
Doing so can cause electric shocks, burns, or injury.
z
Replace the lamp unit after the lamp has cooled (after waiting at least
one hour).
The high temperature inside the cover will cause burns.
z
WARNING:
NOTICE
For USA only
Hg-LAMP CONTAINS MERCURY, Manage in Accord with Disposal
Laws.
See:www.lamprecycle.org or call 1-888-411-1996.
This lamp is used in projectors.
It is not intended to be used for indoor lighting of ordinary homes.
r Illustrations in this manual
f Pictures shown are illustrations of PT-EZ590 in this manual, other models have their
own characteristics and may be different from them.
r Term
f In this manual, the supplied "Wireless/wired remote control unit" or "Wireless remote
control unit" in the projector is referred to as "Remote control".
2 - ENGLISH
TURN THE POWER OFF AND DISCONNECT THE
POWER PLUG FROM THE WALL OUTLET BEFORE
REPLACING THE LAMP UNIT.
Always follow these precautions
2009 / 125 / EC
Advertisement
