Do you have a question about the Monaliza M4C-II and is the answer not in the manual?
Questions and answers
Summary of Contents for Sincoheren Monaliza M4C-II
Page 1
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755-01 MONALIZA LASER SYSTEM Nd:YAG Laser Tattoo Removal Device User Manual Release Date: 2018-06-25 Execution Date: 2018-06-25 File Number: XKYR-SM-A/2- PL755-01 Beijing Sincoheren Science and Technology Development Co. Ltd...
Page 2
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755-01 Revision History Version State Date Modifier Description First 2015-12-10 edition Update energy parameter 2016-03-25 Product appearance and Zhangling 2018-06-25 interface changes...
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755-01 Warning: The treatment handle of PL755 system contains delicate optical module and components. During transportation, the ordering shock- absorbing package shall be used. Otherwise, it may cause maladjustment and malfunction. Warning:...
Page 5
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755-01 Warning: ND: YAG laser is invisible infrared light with wavelength of 1064nm. All people in the treatment area including clientele must wear protective eyewear for anti-radiation. Warning: Laser emits from the tip of the treatment handle, so please avoid exposing directly or indirectly to the light.
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755-01 1.2 Eye protection The laser can cause harm to vitreous body and retina, and might cause blindness if direct sight at the intense light. Warning: Guard against accidental exposure to the intense laser by ensuring that everyone in the treatment room wears protective eyewear whenever the system is in use.
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755-01 1.4 Storage and transportation Temperature range: -10℃~40℃ Humidity range: <90%RH (Non-condensing) Atmospheric pressure range: 860hPa~1060hPa PL755 system can be moved and transported easily. But since the treatment handle contains delicate optical components, so during the course of transportation, the shock-absorbing package originated from the seller must be used.
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755- 2 Appearance and Technical Parameters 2.1 Appearance The appearance and of this product is shown in Figure 1 Figure 1...
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755- Note If the equipment is found to be in short supply when checking the equipment list, please contact the dealer and the supplier as soon as possible before putting it into use.
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755- Insert the water spout into the water inlet on the back ofthe device, add about 3L of deionized water or pure water to the device through the funnel, prohibit the use of tap water or mineral water, and then turn on the device for about 3 minutes to eliminate the air contained in the water circulation.
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755-01 4 Operation Guide 4.1 Preparation Before you start the treatment, please confirm the following information: 1) Observe the water level observation window to ensure that the water level is above the specified level;...
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755-01 Figure 3: welcome interface 4.3 Operation Process 4.3.1 Program Selection Interface Choose wavelength1064nm/ 755nm/ 532nm on the welcome interface to enter the program selection interface, as shown below. 4.3.2 Turn off the system...
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755-01 5 Equipment Maintenance and Troubleshooting 5. 1 Equipment Maintenance 1)Periodically clean the surface ofthe device with a soft, wet cotton cloth. Be careful not to allow liquids to penetrate inside the cabinet.
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755-01 6 Intended use 6. 1 Intended use This device is mainly used to clinically remove some exogenous blue, black and brown pigments ofthe skin, such as tattoos, tattoos, eyeliners, etc. 6.2 Treatment interval The two treatments should be separated by about two months so that the smashed pigment particles have enough time to be absorbed.
Beijing Sincoheren Science and Technology Development Co. Ltd XKYR-SM-A/2-PL755-01 7 Toxic side effects and contraindications 1. For patients with deep color of skin, the use of the instrument, due to the shallow pigment of skin with the absorption of the laser, can make the skin by slight damage, Suggestions for skin whitening treatment before using this instrument.
PL755’s free warranty is one year. Damage caused by force majeure, natural disaster or human error is not covered by warranty. Contact us Manufacture: Beijing Sincoheren Science and Technology Development Co. Ltd. Address: A-4, Sinatrans Plaza, Xizhimen North Street, Beijing, China Tel: +86(10) 82290038 E-mail: topsales07@sincoheren.com...
Need help?
Do you have a question about the Monaliza M4C-II and is the answer not in the manual?
Questions and answers