Download
Share
Print this page
  1. Manuals
  2. Brands
  3. L&W Manuals
  4. CCD Cameras
  5. LVC-A630HM
  6. Manual

L&W LVC-A630HM Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
manual
DESCRIPTION :
SET MODEL NO. :
16 X CCD COLOR CAMERA
LVC - A630HM ( NTSC , High Resolution )
LVC - A630HP ( PAL , High Resolution )
LVC - A630NM ( NTSC , NOR Resolution )
LVC - A630NP ( PAL , NOR Resolution

Advertisement

loading
Need help?

Need help?

Do you have a question about the LVC-A630HM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for L&W LVC-A630HM

  • Page 1 manual 16 X CCD COLOR CAMERA DESCRIPTION : SET MODEL NO. : LVC - A630HM ( NTSC , High Resolution ) LVC - A630HP ( PAL , High Resolution ) LVC - A630NM ( NTSC , NOR Resolution ) LVC - A630NP ( PAL , NOR Resolution...

  • Page 2: General Specifications

    LVC-A630’S Specifications 2 / 9 1. GENERAL SPECIFICATIONS Signal System NTSC ( LVC – M630HP ) PAL ( LVC – M630NP ) REMARKS Scanning System 2 : 1 Interlace Scanning Frequency ( H ) 15.625 KHz Scanning Frequency ( V ) 50 Hz Pick- Up Device 1 / 4 “...

  • Page 3: Reliability Tests

    LVC-A630’S Specifications 3 / 9 2. RELIABILITY TESTS 1) Normal Operation Test ( Initial Camera’s Performance Test ) 23 ˚C ± 5 ˚C 60 % RH * Check the Camera’s performance , and measurement data ( Compare with given tolerance limit ) . 2) Operating Conditions ( Temperature , Humidity ) 0 ˚C ∼...
  • Page 4 LVC-A630’S Specifications 4 / 9 3. LENS TEST CONDITIONS 1) Lens Test Pattern a) Zoom ; TELE WIDE 6sec 12sec 1 Cycle a) Focus ; NEAR 6sec 12sec 2 Cycle a) Iris ; OPEN CLOSE 1.5sec 1.5sec 3 sec 1 Cycle...
  • Page 5 LVC-A630’S Specifications 5 / 9 4. INTERFACE TELE(UP) MENU WIDE(DN) JK303 S-JACK FOCUS(+) FOCUS(-) JK302 V.OUT +12V CN3U1 1) For P/T/Z Control & RS232C Control ( CONNECTOR : 68125-1011, MOLEX ) CN 3U1 ZOOM Zoom & Focus DC Control FOCUS A/D Key 2 input A/D Key 1 input For RS-232C Control...
  • Page 6 LVC-A630’S Specifications 6 / 9 5. Applications ( RS-232C D-Sub 9 Connector ) 1) RS232C Connect ② RD CN3U1 ③ TD ④ DTR ⑤ SG ⑥ DSR ⑦ RTS ⑧ CTS ⑨ RI 2) Zoom & Focus DC Control connect Voltage Range CN3U1 Vcom + ( 6 V~12V )
  • Page 7 LVC-A630’S Specifications 7 / 9 6. Accessory (Option) 1) 10PIN Cable Ass’y ( P/N : 6850R-ZJA01 ) 압축 TUBE NO.1 MARK...
  • Page 8 LVC-A630’S Specifications 8 /9 7. DIMENSION...
  • Page 9 LVC-A630’S Specifications 9 / 9 8. CARTON DIMENSIONS DESC QT’Y ⑥...
  • Page 10 APPENDIX C DATE ; 23 . NOV . 99 VERSION 3.0 Camera Control Command Protocol (For RS-232C, RS-422, RS-485) Model :: x16 Zoom Camera...
  • Page 11 2 / 32 REMOTE CONTROL COMMAND PROTOCOL 1. Communication Format 1. Connection Conditions ; Data Length 1 Byte ( 8 Bit ) Start/Stop Bit 1 Bit Parity Bit None Baud rate 9,600 bps 2. The communication data format from PC to Camera ;...
  • Page 12 3 / 32 REMOTE CONTROL COMMAND PROTOCOL 2. PC Command 1. EEPROM Data Read Command ; Read the data of EEPROM indicated by “E2_ADR”. 1) PC -> Camera 0xC5 0xF0 E2_ADR 0x00 CAM_ID C·S 2) Camera -> PC 0xC5 0xF0 E2_ADR 0x00 E2_DAT...
  • Page 13 4 / 32 REMOTE CONTROL COMMAND PROTOCOL 4. BACKLIGHT Level Read ; Read the current BACKLIGHT level of Camera . 1) PC -> Camera 0xC5 0xAA 0xAA 0x61 0x00 CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0x61 0x00 BL_level 0xXX 0xXX 0xXX...
  • Page 14 5 / 32 REMOTE CONTROL COMMAND PROTOCOL 7. Camera ID Display ON/OFF control ; Switch the display of camera ID (ON/OFF). 1) PC -> Camera 0xC5 0xAA 0x6A 0x00 CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0x6A 0x00 0x6A 0xXX 0xXX 0xXX...
  • Page 15 6 / 32 REMOTE CONTROL COMMAND PROTOCOL 10. Zoom Lens Position Read ; Read the current position value of Zoom lens. 1) PC -> Camera 0xC5 0x36 0x00 0x00 CAM_ID C·S 2) Camera -> PC 0xC5 0x36 0x00 0x00 ZP_CNT+1 ZP_CNT V_MAG 0xXX C·S...
  • Page 16 7 / 32 REMOTE CONTROL COMMAND PROTOCOL 13. Camera Power OFF ; Turn off the power of Camera. 1) PC -> Camera 0xC5 0x3E 0x00 0x00 CAM_ID C·S 2) Camera -> PC 0xC5 0x3E 0x00 0x00 0x00 0x00 0x00 0xXX C·S 14.
  • Page 17 8 / 32 REMOTE CONTROL COMMAND PROTOCOL 15. Memorize Focus Lens Position for External PRESET control ; Memorize the Focus lens position into the volatile “Buffer RAM” designated “Buffer RAM Index” for the external PRESET Move control . 1) PC -> Camera 0xC5 0x4A PRE_I_FH...
  • Page 18 9 / 32 REMOTE CONTROL COMMAND PROTOCOL 17. Non Zoom Tracking External PRESET Move Control ; Move the Zoom and Focus lens to each position and set the Digital Zoom ratio according to data memorized in PRESET “Buffer RAM” designated ‘ INDEX’ , 1) PC ->...
  • Page 19 10 / 32 REMOTE CONTROL COMMAND PROTOCOL 20. Key Action ; Perform the Key action according to the data of “ KEY_NUM” . Caution ; After using the Key action , Camera has to be notified by stop of key action code “ KN_STOP “ . 1) PC ->...
  • Page 20 11 / 32 REMOTE CONTROL COMMAND PROTOCOL 23. Auto Back Light Mode ON/OFF control ; Change the Auto Back Light Mode of camera. 1) PC -> Camera 0xC5 0xAA 0x6D MODE CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0x6D MODE 0x6D 0xXX...
  • Page 21 12 / 32 REMOTE CONTROL COMMAND PROTOCOL 24. BACKLIGHT ON/OFF control ; Switch the BACKLIGHT mode to On/Off according to the data of “MODE” . 1) PC -> Camera 0xC5 0xAA 0x70 MODE CAM_ID C·S 2) Camera -> PC 0xC5 0xAA MODE 0xXX...
  • Page 22 13 / 32 REMOTE CONTROL COMMAND PROTOCOL 27. FOCUS Mode Setting ; Switch the FOCUS mode to AUTO/MANUAL or PUSH_AUTO according to the data of “MODE” . 1) PC -> Camera 0xC5 0xAA 0x73 MODE CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0x73...
  • Page 23 14 / 32 REMOTE CONTROL COMMAND PROTOCOL 30. SPECIAL White Balance Mode BLUE adjust data Setting ; Set the BLUE adjust data at SPECIAL White Balance mode according to the data of “BLUE_ADJ” . 1) PC -> Camera 0xC5 0xAA 0x76 BLUE_ADJ CAM_ID...
  • Page 24 15 / 32 REMOTE CONTROL COMMAND PROTOCOL 33. SHARPNESS Data Setting ; Set the sharpness level of the camera according to the data of “Sharpness” . 1) PC -> Camera 0xC5 0xAA 0x79 Sharpness CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0xXX...
  • Page 25 16 / 32 REMOTE CONTROL COMMAND PROTOCOL 36. SHUTTER Speed Setting ; Set the shutter speed of the camera according to the data of “SSC_CNT” . 1) PC -> Camera 0xC5 0xAA 0x7B SSC_CNT CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0xXX...
  • Page 26 17 / 32 REMOTE CONTROL COMMAND PROTOCOL 37. IRIS OPEN Level Setting ; Set the IRIS OPEN Level of the camera according to the data of “IRIS_CTL” . 1) PC -> Camera 0xC5 0xAA 0x7C IRIS_CTL CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0xXX...
  • Page 27 18 / 32 REMOTE CONTROL COMMAND PROTOCOL 38. AGC Level Setting ; Set the AGC Level of the camera according to the data of “AGC_CTL” . 1) PC -> Camera 0xC5 0xAA 0x7D AGC_CTL CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0xXX...
  • Page 28 19 / 32 REMOTE CONTROL COMMAND PROTOCOL 40. Digital Zoom Mode ON/OFF Setting ; Switch the Digital Zoom mode to ON or OFF according to the data of “MODE”. 1) PC -> Camera 0xC5 0xAA 0x6E MODE CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0xXX...
  • Page 29 20 / 32 REMOTE CONTROL COMMAND PROTOCOL 43. Slow Speed Zoom Tracking External PRESET Move Control ; Perform the Zoom Tracking PRESET action to the target zoom position memorized in the volatile PRESET Buffer RAM indicated by the “INDEX” value. In this case, The Zoom Tracking is performed slowly.
  • Page 30 21 / 32 REMOTE CONTROL COMMAND PROTOCOL 46. CAMERA status Read Command 1 ; Read the current status of the Camera. The return data is “CAM_CON1”. 1) PC -> Camera 0xC5 0xAA 0x80 0x00 CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0xXX...
  • Page 31 22 / 32 REMOTE CONTROL COMMAND PROTOCOL 47. CAMERA status Read Command 2 ; Read the current status of the Camera. The return data is “CAM_CON2”. 1) PC -> Camera 0xC5 0xAA 0x81 0x00 CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0xXX...
  • Page 32 23 / 32 REMOTE CONTROL COMMAND PROTOCOL 48. Digital Effect status of the Camera Read Command ; Read the current Digital Effect status of the Camera. The return data is “DEFT_CON”. 1) PC -> Camera 0xC5 0xAA 0x82 0x00 CAM_ID C·S 2) Camera ->...
  • Page 33 24 / 32 REMOTE CONTROL COMMAND PROTOCOL 49. Read the White Balance Mode ; Read the current White Balance Mode of the Camera. The return data is “WB_MODE”. 1) PC -> Camera 0xC5 0xAA 0x83 0x00 CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0xXX...
  • Page 34 25 / 32 REMOTE CONTROL COMMAND PROTOCOL 51. Read the RED Adjust data at the SPECIAL White Balance Mode ; Read the current RED Adjust data of the Camera at the SPECIAL White Balance Mode. The return data is “RED_ADJ”. 1) PC ->...
  • Page 35 26 / 32 REMOTE CONTROL COMMAND PROTOCOL 55. Read the current BRIGHTNESS data ; Read the current BRIGHTNESS data of the Camera. The return data is “Brightness”. 1) PC -> Camera 0xC5 0xAA 0x89 0x00 CAM_ID C·S 2) Camera -> PC 0xC5 0xAA 0x89...
  • Page 36 27 / 32 REMOTE CONTROL COMMAND PROTOCOL 59. Read the MENU OSD ON/OFF status ; Read the current MENU OSD ON/OFF state of the Camera. The return data is “M_STATE”. 1) PC -> Camera 0xC5 0xAA 0x8D 0x00 CAM_ID C·S 2) Camera ->...
  • Page 37 28 / 32 REMOTE CONTROL COMMAND PROTOCOL 62. Memorize Internal PRESET Position for Internal PRESET control ; Memorize the current zoom, focus, and digital zoom position value into the internal nonvolatile memory of the CAMERA for controlling the Internal PRESET Move. The memory position to store is indicated by the “INDEX”...
  • Page 38 29 / 32 REMOTE CONTROL COMMAND PROTOCOL 64. Slow Speed Internal Zoom Tracking PRESET Moving control ; Perform the Zoom Tracking PRESET action to the target zoom position slowly. In this case, The target zoom position value is memorized in the internal nonvolatile memory. And, the memory position is indicated by the “INDEX”...
  • Page 39 30 / 32 REMOTE CONTROL COMMAND PROTOCOL 3. Key Code Table Description Key Variable Key Code KN_NOT 0x00 Any key function do not operate. Perform Zoom Tracking to TELE side by Normal speed. KN_TELE 0x01 In case of displaying the MENU, operate as the “MENU selection scroll up “...
  • Page 40 31 / 32 REMOTE CONTROL COMMAND PROTOCOL Description Key Variable Key Code KN_M_UP Increase the data of a selected item on the main MEMU . 0x27 Decrease the data of a selected item on the main MENU . KN_M_DN 0x28 KN_POWER Switch the power of the Camera ( ON / OFF ) .
  • Page 41 32 / 32 REMOTE CONTROL COMMAND PROTOCOL Description Key Variable Key Code Use for RS-232C Serial Communication : KN_RS_Rup 0x48 Scroll up the Red level of Color in Special White Balance mode . Use for RS-232C Serial Communication : KN_RS_Rdn 0x49 Scroll down the Red level of Color in Special White Balance mode .

This manual is also suitable for:

Lvc-a630hpLvc-a630nmLvc-a630np