Page 1
DC 120 WW 427001376 Drying Cabinet Operating Manual...
Page 2
NIMO offers you all these features. When you buy a NIMO product you can be sure that the inside is just as good as the outside and that the ethics and morals that go into building this prod- uct are just as high as the quality and function you are getting.
1 Safety instructions This advice on safe operation has been compiled to enable you to avoid incorrect use and unneces- sary risks of accidents and should be read before the drying cabinet is installed and used. DO NOT MODIFY THIS PRODUCT. The drying cabinet must be installed and kept indoors.
Applicable to installation in countries outside the EU The appliance is not intended for use by persons (including children) with various disabilities or inad- equate experience and knowledge. They may use the appliance only under supervision or if they have received instructions on how to use the appliance from a person who is responsible for their safety.
2 Presentation of machine Connection for external fan Connection to mains Damper Fan unit / Electric control unit (behind the panel) Control panel Hangers Door hangers ENGLISH...
3 Air flow The illustration shows the air flow in the drying cabinet. Air intake is on both the left-hand and right-hand sides and through the hangers. ENGLISH...
4 Starting for the first time CAUTION Read the safety instructions Read these operating on page 32 before using the cabinet. instructions before using the drying cabinet for the first time. • Make sure that the cabinet is securely attached to the wall.. •...
5 Operation 5.1 Placement of washing • Take the hangers out of the drying cabinet to hang the items in. There is space for a complete set of workwear on each hanger. • Place the straps of the trousers over the hanger and then hang on the jacket. Place the hanger in one of the four support rails.
5.3 Programme description The drying cabinet has two drying programmes: • Impregnation • Normal The programmes automatically close the drying process when the fabrics are dry. 5.4 Selection of drying programme • Impregnation– Used for drying of a newer type of emergency services suit that has an impreg- nated surface layer.
5.6 Programme pause If the door is opened while the drying process is in progress, the heat will be turned off, and the fan will continue operating for another 5 minutes. If the door is closed within this 5 minute period, the drying process will start again from the beginning.
6 Maintenance 6.1 Preventive maintenance by user The user should wipe the cabinet with a damp cloth after each use of the drying cabinet. It must be free of dust/grit. 6.2 Filter The drying cabinet has four filters located in the roof of the cabinet, two at the front and two at the rear.
7 Troubleshooting 7.1 How to deal with minor disruptions yourself Questions What you can do The drying cabinet is 1. Check the mains connection and that power is supplied. not working. 2. Check that no fuse has tripped. 3. Have you pressed the start button? 4.
7.2 Error codes Name Description / Action ERR 01 Fault in cabinet temp Contact Service sensor Cabinet ERR 02 Fault in temp sensor Contact Service Exhaust air ERR 04 Max. time for drying Contact Service process exceeded Reset. See section on ‘Overheating cut-out’ , 5.9 ERR 05 Overheating ERR 08...
8 Servicing Before contacting Service, you should find out the name, article number and serial number of the drying cabinet. This information can be found on the identification plate located inside the cabinet. Drying cabinet DC120WW Torkskåp FT120FL 61910020 Name of the drying cabinet Article number Serial number (8 digits) ENGLISH...