Letsfit Smart Watch IW2 Manual

All pictures in this manual are for illustration purpose only. Actual product may vary due to product firmware upgrade and app upgrade.

Getting to Know Your Watch

Basic Operation

• Turn on / off the watch:
  Press and hold the function button for 3 seconds.
• Wake a dimmed screen:
  Press the function button or turn your wrist towards you.
• Return to the home screen:
  Press the function button.
• Return to the previous interface:
  Swipe the screen to the right.

Watch Interfaces

This is a touch screen; swipe the screen to go to different interfaces, and tap to enter the function.

The home screen is the clock. On the clock:

• Swipe up to go to the function list, inlcuding Training, Training record, Heart rate, Blood Oxygen, Today, Sleep, Breath, Alarm, Stopwatch, Timer, Music control, and Settings.
• Swipe down to see notifications.
• Swipe left to view today's data, heart rate data, or start a sport, control music.
• Swipe right to see the quick settings bar (do not disturb, wrist sense, brightness, settings).

After the watch is paired with your phone, the home screen will display the time and date.

You can customize the home screen by following the steps below:

Method 1:

1. Tap and hold the home screen.
2. Swipe to choose one and tap to confirm.

Method 2:

1. Open the Letsfit app, go to the "Settings" page → "IW2" → tap "Watch Faces".
2. Select a watch face or choose a photo in your phone album to display on the home screen.
3. Tap "Confirm" to finish setting.

Function List

Tracks your exercise data in up to 10 sports modes. Choose the mode that you want to start on the watch.

Records your daily training data.

Tracks your real-time heart rate automatically and continuously.

Measures your blood oxygen level.

Tracks your daily steps, calories burned and distance data.

Check your daily sleep data.

Guides your breathing for a relaxation.

Set different alarms on the watch or in the app to make the watch vibrate to remind you.

Use the stopwatch to make your exercise more standardized.

Customize your timer.

Control the music playing of your smartphone.

Some basic settings and information of the watch.

Tracking Sports

The watch tracks your exercise data in up to 10 sports modes.

Start a sport
Tap "Training" → Swipe the screen to select a sports mode you want to start.

Set a target
Before beginning an exercise, you can set training goals such as distance, duration, calories burned, etc.

GPS connecting (Only for outdoor running / outdoor walking / outdoor cycling modes)

You can start Outdoor Run / Outdoor Walk / Outdoor Cycle in GPS mode on the watch using your phone's GPS (take your phone with you during these exercises). When you start an outdoor sport, the watch begins searching GPS signal. Please let the Letsfit app run in the background and allow the location services on your phone, then move to an open area and stand still to better receive the signal. After the GPS is connected, the watch will start tracking the sport.

When the GPS connection fails, you can tap to start Outdoor Run, Outdoor Walk, Outdoor Cycle in non-GPS mode. Your movement route will not be displayed in your training record after the exercise is ended.

During sports
Swipe the screen up or down to flip through exercise data.

End the sport
Press the function button and tap to end the sport and tap to confirm.

Exercise data is displayed after the exercise has ended. Swipe up the screen to flip through exercise data:

Notes:

• After ending an exercise, you can view detailed data and graphs in the app (Go to the "Training" page, swipe down the page to synchronize data, and tap the exercise you just ended). You can also tap "Training record" in the function list to view your detailed training data on the watch.
• After you finish the outdoor running, outdoor walking or outdoor cycling exercise in GPS mode, your movement track will be displayed in the app (Go to the "Training" page of the app, and then tap on the exercise you just ended to view).
  
• Data of exercises less than one minute will not be saved.
• When the battery level is less than 10%, the watch enters low battery mode, at which you cannot start a sports mode. Please charge the watch to operate it again.

Monitoring Heart Rate

Tap "Heart rate" in the function list to enter the heart rate interface, the watch will automatically measure your real-time heart rate. You can also view your all-day heart rate data in the heart rate interface of the watch or in the app.

Note: To monitor heart rate more accurately, wear the watch on the upper position of your wrist and a bit tighter than usual when you exercise. In addition, complete your profile in the app.

Measuring Blood Oxygen Level

Before measuring, wear the watch a finger-width below the wrist bone and a bit tighter than usual.

1. Tap "Blood Oxygen" to enter the blood oxygen level detection mode.
2. When measuring, keep your arm flush with your chest and the watch screen facing up. Keep your arm still to ensure the accuracy of the data.

Tracking Daily Activity Data

The watch tracks your all-day activity data, including steps, calories burned and distance.

Tracking Sleep

The watch automatically tracks your sleep duration and consistency with a comprehensive analysis of sleep quality data. Tap "Sleep" in the function list so you can check your sleep records and improve your routine.

Breathing Guide

Tap "Breath" in the function list to enter breathing mode. Select the speed and duration of the breathing training. Then tap to start and follow the instructions to breathe. If you want to end the breathing training, press the function button to exit.

Setting Alarms

Method 1 (On the watch):

1. Tap "Alarm" in the function list.
2. Tap "+" to add an alarm. Set the alarm time, and repeat time.
3. Tap to save your setting

Note: You can set up to ten alarms on the watch.

Method 2 (In the app):

1. Go to the "Settings" page in the Letsfit app and tap "IW2".
2. Tap "Sleep Alarm" to enter the alarm setting interface.
3. Tap "Add" to add an alarm.
4. Set the alarm time, title, vibration period and repeat time.
5. Tap "Confirm" to save your settings.

You can enable/disable the alarm on your watch (Tap "Alarm" on the watch and then choose to turn on/off the alarm you set.)

Controlling Phone Music

After the watch is connected to your phone, tap "Music control" in the function list and control the music playing on your phone.

Note: You can only control the music player that's running on your phone.

More Functions

Call Notification

When there is an incoming call, the watch vibrates to alert you, and the screen displays the caller ID.

Tap on the watch screen to reject the call.

Notes:

• Only when "Notification alerts" is enabled in the app ("Settings" page → "IW2" → "Notification alerts", turn on "Notification alerts"), will calls be notified.
• When the "Do not disturb" function is enabled in the app ("Settings" page → "IW2" → "Do Not Disturb") or on the watch (Quick settings bar → ), calls will not be notified on the watch during the do-not-disturb period.

Message Notification

When messages (like Facebook, Twitter, and Instagram messages) come in, the watch vibrates to alert you, and the screen displays the message content.

Notes:

• Only when "Notification alerts" is enabled in the app ("Settings" page → "IW2" → "Notification alerts", turn on "Notification alerts"), will messages be notified.
• When the "Do not disturb" function is enabled in the app ("Settings" page → "IW2" → "Do Not Disturb") or on the watch (Quick settings bar → ), messages will not be notified on the watch during the do-not-disturb period.

Sedentary Reminder

The watch vibrates to remind you to get up and move around when you have been sitting too long ("Activity" page → "Active Hours" → "Sedentary Alert Settings", enable the movement reminders function and set the remind interval.)

Basic Specifications

Model No.: IW2
Sync: Bluetooth 5.0
Screen: 1.55" TFT LCD
Battery Capacity: 260mAh
Working Voltage: 5V-500mA
Working Temperature: 0℃ to 45℃
Weight: 1.34oz (38g)
Working Time: about 10 days

FAQs

Failure to pair the watch with the Letsfit app on your smartphone again

1. Swipe the screen of watch and tap "Settings" to enter settings mode. Tap "System Menu" and choose "Factory Reset". The information on the watch will be reset and the watch will be restarted.
2. Use the Letsfit app to scan the QR code displayed on your watch to pair.

If you still fails to connect the watch to the app, please kindly take the following steps:

1. Make sure your smartphone's Bluetooth is enabled and make sure the watch is not connected to other smartphones.
2. Search this device in the app to pair (Go to the "Settings" page → "+ Pair new device" → "IW2" → tap "Search Devices").
3. Make sure the distance between your smartphone and the watch does not exceed 0.5 meters and keep the watch screen always on when pairing.

Occasional failure to connect with Bluetooth

Reboot your smartphone or restart your smartphone's Bluetooth.

Failure to receive SMS / calls notifications

Calls / SMS notification function works when the watch connects to your smartphone via the app. Please kindly refer to the following tips:

1. Go to your smartphone Settings, find Letsfit app, enable the Location and all Notifications.
2. Enable your phone's Bluetooth and go to the Letsfit app to pair the watch.
3. Open the app. Go to the "Settings" page → "IW2" → "Notification alerts", turn on "Notification alerts".
4. Make sure the "Do not disturb" function is not enabled in the app or the watch.
5. Make sure the watch is connected to your phone, and the app is running in the background.

The watch is disconnected from the Letsfit app on your smartphone

The watch will disconnect from your smartphone in the following cases:

1. Smartphone Bluetooth is off or exceeds the Bluetooth connection range (the maximum Bluetooth connection range is 10 meters and can easily be reduced by walls, furniture, etc.)
2. The Letsfit app is closed on the phone. (This can occur automatically under certain circumstances.)

To reconnect the watch to your smartphone, please kindly take the following steps:

1. Go to your smartphone system Settings, find the Letsfit app, and enable the Location and Bluetooth.
2. Clear all running / background processes on your smartphone. Open the Letsfit app, go to the "Settings" page, tap "IW2", and then the watch will reconnect to your smartphone and update data. You can also restart your smartphone and Bluetooth, then re-pair the watch in the app.

Blood Oxygen Level Measurement Accuracy

The Blood oxygen level will be affected by factors such as motion, watch placement on the wrist, skin temperature and skin perfusion. These factors will cause fluctuations in blood oxygen measurements.

For a single measurement on the watch, please wear the watch a finger-width below the wrist bone, snug but comfortable on your wrist. When measuring, stay still and make sure your wrist is flat with the watch facing up. If you are sitting, you can rest your arm on a table with the watch facing up.

The smart watch blood oxygen sensor isn't a medical device and won't be able to diagnose or monitor any medical conditions. If there is a problem with the measurement, we recommend you consult your doctor.

Warranty

We strive to build our products with the highest attention to detail and craftsmanship. However, sometimes there are occurrences of a defect, so we are happy to offer a ONE-year hassle-free warranty on all our devices as we continue to make amazing products. Please contact us if you have any questions about our devices.

Important Safety Instructions

The device contains electrical equipment that may cause injury if not used properly. For example, prolonged contact may contribute to skin allergies for some users. To reduce irritation, please read the safety guidelines on the following pages to ensure proper use and care.

• Do not expose your device to liquid, moisture, humidity or rain while charging; do not charge your device when it is wet, as this may result in electrical shock and injury.
• Keep your device clean and dry. Do not use abrasive cleaners to clean your device.
• Consult your doctor before use if you have any preexisting conditions that might be affected by using this device.
• Do not wear it too tight. If your device feels hot or warm, or if it causes any skin irritation or other discomforts, please discontinue using your device and consult your doctor.
• Do not expose your watch to extremely high or low temperatures.
• Do not leave your watch near open flames such as cooking stoves, candles, or fireplaces.
• This product is NOT a toy - never allow children or pets to play with this product. Always store the product out of the reach of children. The devices themselves or the many small parts they contain may cause choking if ingested.
• Never try to abuse, crush, open, repair or disassemble this device. Doing so will void the warranty and can result in a safety hazard.
• If any parts of your product require replacement for any reason, including normal wear and tear or breakage, please contact us.
• Do not use your device in a sauna or steam room.
• Dispose of this device, the device's battery and its package in accordance with local regulations.
• Do not check any notifications, GPS, or any information on your device's display while driving or in other situations where distractions could cause injury or hazard. Always be aware of your surroundings while exercising.

Battery Warnings

A lithium-ion battery is used in this device. If these guidelines are not followed, batteries may experience a shortened life span or may cause fire, chemical burn, electrolyte leakage, and/or injury.

• Do not disassemble, modify, remanufacture, puncture or damage the device or batteries.
• Do not remove or attempt to remove the non-user-replaceable battery.
• Do not expose the device or batteries to fire, explosion, or other hazards.

Health Warnings

• If you have a pacemaker or other internal electronic device, consult your physician before using a heart rate monitor.
• The optical wrist heart rate monitor emits green light and flashes occasionally. Consult your physician if you have epilepsy or are sensitive to flashing lights.
• Always consult your physician before beginning or modifying any exercise program.
• The device, accessories, heart rate monitor, blood oxygen level measurement and related data are intended to be used only for general fitness and wellness purposes, not for medical purposes, and are not intended to diagnose, monitor, treat, cure, or prevent any disease or condition.
• The heart rate and blood oxygen level readings are for reference only, and no responsibility is assumed for the consequences of any false readings.
• While the optical wrist heart rate monitor technology typically provides the best estimate of a user's heart rate, there are inherent limitations with the technology that may cause some of the heart rate readings to be inaccurate under certain circumstances, including the user's physical characteristics, fit of the device, and type and intensity of activity.
• The smart watch relies on sensors that track your movements and other metrics. The data and information provided by these devices are intended to be a close estimation of your activity and metrics tracked, but may not be completely accurate, including step, sleep, distance, heart rate, and calorie data and blood oxygen levels.
• If you have eczema, allergies or asthma, you may be more likely to experience skin irritation or allergies from a wearable device.
• Whether you have the conditions above or not, if you start to experience any discomfort or skin irritation on your wrist, remove your device. If symptoms persist longer than 2-3 days of not using your device, contact your doctor.
• If you sweat for more than two hours while wearing your watch, be sure to clean and dry your band and your wrist to avoid skin irritation.
• Prolonged rubbing and pressure may irritate the skin, so give your wrist a break by removing the band for an hour after extended wear.

Maintenance

• Regularly clean your wrist and the smart watch, especially after sweating during exercise or being exposed to substances such as soap or detergent which may adhere to the internal side of the watch.
• Do not wash the watch with household cleanser. Please use soapless detergent, rinse thoroughly and wipe with a soft towel or napkin.
• While the watch is water resistant, wearing a wet band is not good for your skin.
• If your bands get wet—for example after sweating or showering—clean and dry them thoroughly before putting them back on your wrist.
• Be sure your skin is dry before you put your bands back on.
• Do not bring your device into contact with any sharp objects, as this could cause scratches and other damage.
• For light-colored arm bands, minimize direct contact with dark-colored clothing, as color transfer can occur.