Kanguru Databank User Manual page 4

•
The "Windows has finished installing
the software that your new hardware
device requires" dialog appears. Click
"Finish."
•
Repeat the above process for the
second NEC USB Open Host
Controller.
•
After you have installed the two NEC
USB Open Host Controllers, Windows
will find a "PCI Universal Serial Bus"
device. Click "Next" to continue.
•
Another dialog will appear. Select
"Display a list of all the drivers in a
specific location, so you can select the
driver you want". Click "Next."
•
In the dialog that appears, highlight
"USB Controllers". Click "Next."
•
Click on the "Have Disk" button as
shown in figure 4.
•
In the dialog that appears, click on the
"Browse" button.
•
Navigate to the folder that contains
the USB 2.0 drivers. Click "OK."
•
A dialog will appear with "NEC PCI to
USB Enhanced Host Controller"
highlighted, click "Next" to continue.
•
The "Windows driver file search for
the device" dialog appears with the
location of the driver. Click "Next" to
continue.
•
The "Window has finished installing
the software that your new hardware
device requires" dialog appears. Click
"Finish."
•
Restart Windows.
Figure 2
Figure 3
Figure 4
Figure 5