Advertisement
4. Installation Procedure:
1.) For ease of use you may want to print out this manual.
2.) Please make sure your computer is turned off while installing the PCI card.
3.) Remove the side paneling to your PC to gain access to you motherboard and PCI
card slots.
4.) Insert the PCI card into an available PCI slot. You should be able to feel the card
snap into place. Please make sure the card is securely in place before moving on.
5.) Next insert the 3-port hub into either a 5.25" bay or 3.5" bay, and connect the
cable to the pins on the PCI card. You will notice the pins and connector can only
connect in one position. Please make sure the pins are lined up properly with the
connecting before trying to connect the two.
6.) After making sure everything is connected properly you can now power on your
computer.
7.) A found new hardware wizard will appear you your desktop letting you know that
the new PCI card has been detected and is looking for drivers. Before moving on
please insert the provided drivers CD.
8.) Press "Next" until you get to the screen that allows you to specify a location.
Here select the CD-ROM drive for a location to search.
9.) Your computer will then finish the installation process and you may have to
restart your system for the changes to take place.
Warranty
This product carries a 1-year warranty from the date of purchase. Any claims for loss or
damage must be made to carrier directly. Claims for shipping errors should be reported
to Kanguru Solutions within three (3) business days of receipt of merchandise.
Tech Support
If you experience any problems installing your KanguruCombo hub or have any technical
questions regarding any of our products, please call our tech support department. Our tech
support is free and available Monday thru Friday, 9am to 5pm EST.
Call 1-508-663-0105 or
Visit our website at www.KanguruSolutions.com
Advertisement
