EarFun UBOOM Bluetooth Speaker Manual

EarFun UBOOM Bluetooth Speaker Manual

Also See for UBOOM:

Advertisement

EarFun UBOOM Bluetooth Speaker Manual

UBOOM

What's in the Вох

EarFun UBOOM
EarFun UBOOM

User Manual
User Manual


Туре-С USB Саblе

Buttons & lndicators

Buttons & lndicators

Connections

Connections

Notes:
Plugging in an audio саblе will automatically switch to AUX mode. When using AUX mode, control audio playback via the connected device.

Bluetooth Pairing

Bluetooth Pairing 1
Bluetooth Pairing 2

Note:
lf the speaker didn't pair with any device and no-operation in 30 minutes, it will shut down automatically.

Battery lndicator

Step 1:
Click the 'Edit' and add the 'Batteries' widget, then click 'Done'.
Battery lndicator Step 1

Step 2:
The battery remaining capacity has bееn shown on your device.
Battery lndicator Step 2

For Android (Support Android 8.0 or higher):
lt varies from the Android device, please refer to the instruction manual of your device.

Speaker LED lndicator

Flashing Blue Bluetooth Pairing Mode
Solid Blue Connected to a device
Battery Level Battery Level < 15%: Indicator stays on red
Battery Level < 2%: Indicator flashes red for 8 seconds, then the speakers turns off.
Charging Indicator stays on red
Fully Charged Indicator stays on white

True Wireless Stereo Connection with Two UBOOMs

Step 1: Pair and connect UBOOM А to your Bluetooth device.
True Wireless Stereo Connection with Two UBOOMs Step 1

Step 2: Power on UBOOM В, and press the Bluetooth buttons of the two speakers simultaneously for 5 seconds.
True Wireless Stereo Connection with Two UBOOMs Step 2

Step 3: The two indicators stay bluе, and the speakers enter True Wireless Stereo Mode.
True Wireless Stereo Connection with Two UBOOMs Step 3

Note:
Once the two UBOOMs have entered wireless stereo pairing mode before, you don't need to pair them as the first pairing. Simply power on the two UBOOMs and they will connect to each other automatically.

Functions

Playing Music
Playing Music

Speakerphone
Speakerphone

Sound Mode
Sound Mode

Reset and Reconnect

lf this speaker becomes disconnected or has another connecting proЫem, you can press and hold "Volume +" and "Volume -" buttons simultaneously for 5s at least to clear the pairing of speaker and remove the old pairing in your Bluetooth device, and then pair again.
lf this speaker becomes out of control and can't bе powered off, you can press and hold power button for 8s at least to reboot.

Reset and Reconnect Step 1
Reset and Reconnect Step 2

Specifications

- Bluetooth Version: V5.0
- Bluetooth Profile: A2DP, AVRCP, HFP, HSP
- Transducer: 2 x 45mm
- Output Power: 2 x 12W
- Signal-to-noise Ratio: ≥ 80dB
- Battery: (7.4V, 2200mAh)
- Play Time: Up to 16 hours (varies by volume level and audio content)
- Charging Time: About 4 hours
- Dimensions: 166.5 x 88 x 88 (mm)
- Weight: 585g

Customer Service

18-month Limited Warranty
For FAQS and mоге information, please email to:
service@myearfun.com
www.myearfun.com


Facebook

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.


There's danger of explosion if battery is incorrectly replaced
Replace only with the same or equivalent type of battery.
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.

EU Declaration of Conformity

Shenzhen Earfun Technology Co., Ltd. hereby declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and RoHS 2011/65/EU Directive.
The declaration of conformity may be consulted in the support section of our Web site, accessible from www.myearfun.com

Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen Earfun Technology Co., Ltd. is under license.

Other trademarks and trade names are those of their respective owners.

Signs

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download EarFun UBOOM Bluetooth Speaker Manual

Advertisement

Need Assistance?

Do you have a question about the UBOOM that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents