Xmart HL-WALL-15 User Manual

HL-WALL-15
Solar Lamp
USER MANUAL
Parts Identication
1
2
3
4
Solar Panel
1
PIR and Indicator
2
Switch
3
Lampshade
4
Special Features:
Monocrystalline Solar Panel
Li-ion Rechargeable Battery
Equipped With PIR Sensor
Congurable Operation Modes
Detachable and portable design
PC Case
Compact Design, High Brightness
HL-WALL-15 - TECHNICAL SPECIFICATIONS / ESPECIFICACIONES TECNICAS
Luminosity / Luminosidad (LM)
SOLAR PANEL / PANEL SOLAR
Type & Capacity / Tipo y Capacidad
Li-Ion BATTERY / BATERIA Li-Ion
Capacity / Capacidad
Charge & Discharge Temperature /
Temperatura de Carga y Descarga
Recharge Time / Tiempo de Recarga
ILLUMINATION / ILUMINACION
LED (OSRAM)
Light Color Temperature / Temperatura de Color de la Luz
Efciency / Eciencia
OPERATION / OPERACION
Backup (During cloudy days) / Autonomía (con Poca Luz Solar)
Operation Modes / Modos de Operación
Mode Indication / Indicación de Modo
Capacity Indication / Indicador de Capacidad
PIR
IP/IK Codes / Códigos IP/IK
Directives / Normativas
Installation Height / Altura de Instalación
1000
WARNING
lumens
1. Keep the device away from re and re risk
2. There are no replaceable parts inside the lamp. If disassembled warranty will be void.
3. Do not remove battery for other use. If backup time is too short, lamp's battery needs to be recharged under bright sunlight
4. Clean solar panel regularly for more efcient operation and longer backup (Suggestion: At least every 6 months)
5. Long term storage might cause battery damage and leakage, Leakage might cause battery spontaneous combustion
6. Operation temperature for this lamp must comply with Technical Specications
7. Solar Panel must be oriented toward sun for battery charging efciency
Installation Instructions
Fix the lamp to the wall with screws
Wall
IMPORTANT
1. Use standard installation accessories
2. If stored, charge the lamp every 3 months, to avoid
battery damage
3. If stored for more than 1 year without charging, make a
charge & discharge process to assure battery is in good
condition, otherwise it is not allowed to use.
Mode 1: Red/Rojo - Mode 2: Green/Verde - Mode 3: Orange/Naranja
CE (IEC60598-1 / IEC60598-2-3 / EN55015 / EN61547)
Operation Instructions
Power On/Off: Press switch for 1.5 Sec, approx.
1
2
Mode Change: Press switch shortly to choose Mode 1,
Mode 2, or Mode 3.
Select Operation Mode according to your own requirements
Available Modes:
Mode 1
Mode 2 (Green):
Detachable portable design
Mode 3 (Orange):
Battery Power Indication:
Green:
Orange:
Red:
Note: Indicator LED regularly shows Battery Capacity.
When changing Operation Mode it shows selected
mode for 5S, then it returns to show Battery Capacity
During portable operation press button to change Luminosity:
1st Push: 100LM
2nd Push: 200LM
1000
Monocrystalline / Monocristalino, 1 W
3.7 Vdc / 7.4WH / 2.000 mAH
Charge / Carga: -10 to 60 °C
Discharge / Descarga: -20 to 60 °C
10 H
2835 - 20pcs
4000K, Ra 80+
190 lm/W
Up to 10 nights / Hasta 10 noches
Mode 1: 50LM + PIR (1000LM)
Mode 2: 0LM + PIR (1000LM)
Modo e: 200LM x 6h
Green / Verde: >70%
Orange / Naranja: 70% to / a 30%
Red / Rojo: <30%
120º, >5m
IP65 / IK10
1.6 mts
(Red): 50LM + PIR 1000LM x 10s
0LM + PIR 1000LM x 10s
200LM x 6H
> 70%
Between 30% and 70%
< 30%
www.xmart-ups.com