Summary of Contents for JUSTCHLOR J100SC
- Page 1 USTCHLOR OWNERS HANDBOOK Page 1 of 16 Created by: Product Management – Just Range of Products – Jasco Trading (Pty) Ltd...
- Page 2 OWNERS MANUAL ® PREAMBLE Congratulations of selecting JustChlor as you Salt Water chlorinator of choice. You have made a wise Leisure Time Investment. We trust that you will have years of hassle-free pleasure in and around your swimming pool. For us to ensure that you maximize your investment, we suggest that you, the Pool Owner take special note of the following.
- Page 3 Diagram 1 4. Electrical Connection 4.1. Ensure the Pool pump and JustChlor Power Pack is connected to the same power ® source i.e. The Pool Pump Timer (especially the self cleaning models). Created by: Product Management – Just Range of Products – Jasco Trading (Pty) Ltd...
- Page 4 USTCHLOR OWNERS HANDBOOK Page 4 of 16 4.2. Should you not have a fully operational timer with multiple setting options, then you will experience difficulties. We recommend that you upgrade to a newer generation timer. 4.3. Ensure that the current carrying capacity of the circuit breaker feeding the pump, and now the chlorinator system, is sufficient to carry the additional load.
- Page 5 Following this procedure saves using excess chemicals and the problems associated with correcting such errors. If you suspect JustChlor chlorinator is not making chlorine, this can easily be checked:- ®...
- Page 6 There are a number of excellent websites that will enlighten you in “Swimming Pool Water Chemistry” should you wish to further your knowledge on water chemistry. Alternatively make use of our own website: www.justchlor.co.za. 10.3. Here are the Parameters that should be noted and adhered to: •...
- Page 7 Electrode. 13. Checking Salt Level The salt/chlorine indicator on your JustChlor Chlorinator can be used to check the pool salt ® level, albeit that this is not a exact reading, it does give you a fair indication what the salt levels are:- 13.1.
- Page 8 USTCHLOR OWNERS HANDBOOK Page 8 of 16 Under Salt Condition: In the event of Low Salt concentrations, or readings under the 100% mark on the Output Meter in Salt Test Mode, it is advisable to turn the Chlorinator OFF until the salt levels have been increased.
- Page 9 USTCHLOR OWNERS HANDBOOK Page 9 of 16 STARTING UP YOUR CHLORINATOR 1. SELF CLEANING (SC) SYSTEMS. (J100 SC or J200 SC models) Like all other chlorinators in the industry, are not 100% maintenance free, they are generally referred to as Low Maintenance units, requiring a certain degree of customer intervention or maintenance.
- Page 10 USTCHLOR OWNERS HANDBOOK Page 10 of 16 4. STANDARD (STD) SYSTEMS (J100 STD or J200 STD models) As this unit is designed to operate in one direction (unidirectional), the electrode will have to be cleaned on a regular basis. Once again the impact of the water hardness of the pool will determine the calcium build up (white chalky deposit) on the electrode.
- Page 11 1:10 pool acid/ water solution and conduct the test again. • The electrode may be faulty or starting to deteriorate, consult your nearest dealer or contact us on: www.justchlor.co.za. Created by: Product Management – Just Range of Products – Jasco Trading (Pty) Ltd...
- Page 12 USTCHLOR OWNERS HANDBOOK Page 12 of 16 Q: I’m getting a reading on my chlorinator Output Meter but there is no chlorine reading in the pool water. The chlorinator isn’t working, what do I do? A: If you are registering an output of anything from 25% - 100% on any given Selector Switch setting, then the chlorinator is operational;...
- Page 13 Overload Button. Repeat normal operation. • Failing the above contact your local agent or contact us on: www.justchlor.co.za. Q: I want to lengthen the output cable from the Power Pack to the Electrode. Can I do this without damaging the unit? A: Under no circumstances should the Output Cable to the Electrode be lengthened.
- Page 14 USTCHLOR OWNERS HANDBOOK Page 14 of 16 Q: The meter on my chlorinator keeps flickering up and down, I think it’s faulty. What do I A: The fault may lie with elsewhere. It is advisable to check the following: NOTE: The Electrode Housing is the last thing in the return to the pool and that the Electrode Housing is manufactured to a specific size much larger than that of the surrounding/feeding pipe work.
- Page 15 USTCHLOR OWNERS HANDBOOK Page 15 of 16 A quick water to test if this is the case; isolate/bypass the Solar panels to see if there is a change in the water flow through the Electrode Housing and that the meter stops flickering. If this is the case then you should have your Solar Heater installer check the system for any air leaks, or have the pump checked for wear-and-tare.
- Page 16 USTCHLOR OWNERS HANDBOOK Page 16 of 16 JUSTCHLOR CHLORINATOR WARRANTY CONDITIONS: Jasco Trading (Pty) Ltd manufactures of the product herein after referred to as “the Supplier”. Warrants to the original purchaser of this product (“the Customer”), that this product will be...
- Page 17 Y E A R S O F E X C E L L E N C E CELL CLEANING CONTAINER AND PROCEDURE Take a 2L plastic cool drink bottle and cut off the top with a sharp knife, taking extreme care So as not to injure yourself, above the lable (point B) Place container on sand in a well ventelated area away from plants as there will be spilage Pour pool acid (hydrochloric) to point a (30mm from bottom) now add tap water to point B...
- Page 18 Y E A R S O F E X C E L L E N C E OWNER INFORMATION SHEET...
Need help?
Do you have a question about the J100SC and is the answer not in the manual?
Questions and answers