Advertisement
Quick Links
Advertisement
Related Manuals for XDeer S10
Summary of Contents for XDeer S10
- Page 1 SAFE (S10)
- Page 3 1.Emergency Lock 4.Battery Compartment 2.Fingerprint Collector 5.Programming Button 3.PIN Code 6.LED ：...
- Page 4 SAFE Owner’s Manual Expansion Screws · · XDeer Gun Safe S10 Security Cabinet · · Backup Keys Corner Stickers · · ：...
- Page 5 keyhole Insert the key, open the door Remove the battery unit indicated by Insert 4xAAA alkaline batteries Please align this hole to insert the battery box ：...
- Page 6 1.Press and hold the setting button until the blue LED ashes one time with one beep. 2.Release setting button, input 4-6 digital new code then press the setting button again. 3.Code setting is successful if blue LED Tips: The initial password is 1234 ashes 2 times with 2 beeps.
- Page 7 1.Press and hold the setting button until the blue LED ashes one time with one beep. 2.Release setting button, nger swipe across ngerprint scanner for 4 times. 3.Finger setting is successful if blue LED ashes 2 times with 2 beeps. (The blue LED ashes whenever you enter ngerprint scanner, and you need record 4 times continuously)
- Page 8 1.Press and hold the setting button and don’t let go. 2.There is one beep and blue LED ashes one time and don’t let go. 3.Keep holding the setting button, there are 2 beeps and blue LED ashes 2 times. 4.Release setting button. 5.All the ngerprints have been erased.
- Page 9 ！ Do not use rechargeable batteries or any other type of non- alkaline battery. Do not mix old and new batteries. Do not mix alkaline and standard batteries. 5-times wrong code will activate 5-minute blue LED ashes ！ (You can stop it by using key to open it and remove the battery) and the keypad will be locked 5 minutes.
- Page 10 1.Fix the safe in the place which is not easy to move. 2.Drill holes for expansion bolts in the right place. 3.Turn the expansion bolts counter clockwise to separate. 4.Use the expansion bolts to secure the case to the platform. 5.Make sure the case is mounted in place as required and then tighten all screws.
- Page 11 ：...
- Page 12 ·Press”1” for 5 seconds to activate the mute mode. To cancel the mute mode, repeat the same step. ·If all keypad keys will light up blue 10 times with 10 beeps when opening the safe by electronics way, your battery level is critically low and your safe needs to be replaced the 4 new batteries.
- Page 14 We are committed to satisfying our customers with quality products and great customer service Thank you for your trust in XDeer - Best wish for you-...