Page 1
Distributor: IGM nástroje a stroje s.r.o. Ke Kopanině 560, 252 67, Tuchoměřice Czech Republic, EU Phone: +420 220 950 910 E-mail: sales@igmtools.com Website: www.igmtools.com PDF ONLINE www.igmtools.info 2022-07-12 142-PD80 IGM Edgeband Trimmer for an ABS Tape Manual EN v2.2.00 A4ob...
The design, construction, images or content may slightly differ due to continuous development. Should you discover any errors in the manual, please tell us about them at: podpora@igm.cz. CONTENTS PAGE 5.4 Dust extraction...
Warranty is governed by the Terms and Conditions and new owner. Warranty conditions of the company IGM tools and machines Ltd. The version of which is Any changes or rebuilding of the machine is not available at www.igmtools.com.
Operating instructions EN 3.3 Risks The tool is sharp, watch out so you do not cut yourself. Even when using the trimmer according to the Use gloves. manual, there is still some danger. Danger of flying particles. Wear eye protection and a Danger of a rotating tool.
Operating instructions EN 5.3 Connection to power the mark on the arbor. Improper assembly may cause Before connecting the machine to electricity network, danger in the form of vibration, or tool release. Do not make sure that the main switch is in the ‘0’ OFF (turned tighten the union bit, if the router bit is not inserted, off ) position.
Operating instructions EN 6.2 Adjusting the bearing stop 7. OPERATION Turn the trimmer on by placing the switch in the ON Push the pin upwards and rotate it in the arrow “1” position. Hold it firmly with both hands by the direction (fig.9 and fig.10).
To maintain SAFETY and RELIABILITY of the product, all repairs and any other maintenance must be carried out by an authorized IGM service center and with the use of original spare parts. www.igmtools.com...