Advertisement
Quick Links
ICE LADDER
Instructions
Made in the
U.S.A.
Manufactured by:
P.O. Box 2142
McHenry, IL 60051
815-861-2625
Email:
chris@iceladder.com
Website:
www.iceladder.com
SPECIFICATIONS
Work Mode:
Ladder Height - 8'
Transport Mode:
Height - 35"
Length - 50"
Width - 18"
Weight - 65 lbs.
Ice/Pier Thickness:
1" to 22"
Material:
304 Stainless Steel
Updated 8-25-14
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Penguin ICE LADDER
- Page 1 SPECIFICATIONS Work Mode: Ladder Height - 8’ ICE LADDER Transport Mode: Height - 35” Length - 50“ Width - 18” Weight - 65 lbs. Ice/Pier Thickness: 1” to 22” Instructions Material: 304 Stainless Steel Manufactured by: P.O. Box 2142 McHenry, IL 60051...
- Page 2 1) Lay ladder in storage mode down on a flat surface. 2) Loosen lower circle grip locking lever. 3) Rotate lower circle grip and set to pier or ice mode. Align pins with holes and lock lever. 4) Stand circle up on flat surface. 5) Locate ladder tensioning knobs.
- Page 3 16) Keep upper locking lever facing towards outside of 17) Loosen handle. 18) Using handle on circle rotate circle so bottom grip circle. touches underside of mounting surface. 19) Adjust upper arm so receiving plate is at a 15-20° 20) Lock handle. 21) Locate ladder locking pin.
- Page 4 1) Place circle on flat surface and place arm at top of 2) Place ladder around circle. 3) Align the rungs of the open end of the ladder to the circle. circle. 6) Ladder ready for storage. 4) Locate tensioning knobs and place through holes. 5) Tighten ladder to circle with tensioning knobs.
Need help?
Do you have a question about the ICE LADDER and is the answer not in the manual?
Questions and answers