Download Print this page
NORBERTS Cinch Buckle Attachment Instructions

NORBERTS Cinch Buckle Attachment Instructions

Advertisement

Quick Links

GYMNASTICS • MARTIAL ARTS
Cinch Buckle Attachment Instruction
1. Insert the strap into the underside of the buckle closest to where the belt is sewn to the buckle.
2. Wrap the belt around the slider bar and through and out the bottom of the buckle.
3. Pull strap tight.
1
IMPORTANT CONSUMER PRODUCT HAZARD WARNING — PLEASE READ!
A possibility of serious injury, including paralysis or death, is inherent in any activity involving motion or height. Equipment with which this notice is
included is intended for use only by properly trained, qualified persons under supervised conditions. Use without proper supervision is dangerous and
should not be undertaken or permitted. Know your limitations as well as the limitations of your equipment. Consult a qualified instructor before
attempting any new activity or skill. This equipment must be used with proper mats, spotting equipment and qualified spotters for each activity or skill.
Use this equipment only for its intended purpose. Do not modify equipment in any way. Inspect each component for damage, loose fittings or signs of
wear before each use. Do not use if you have any concern as to the condition of this equipment. Test unit for stability prior to each use. Do not use if
you have any concern about the stability, condition or suitability of this equipment. Inspect warning labels and replace when marred or damaged.
Before each subsequent use, re-check equipment stability and settings.
SEE OTHER SIDE FOR IMPORTANT PRODUCT AND HAZARD INFORMATION
Belt sewn to
buckle here.
2
2
3
1
CHEERLEADING • STUNTWORK
END
START
3
REV 12/18/19

Advertisement

loading

Summary of Contents for NORBERTS Cinch Buckle Attachment

  • Page 1 CHEERLEADING • STUNTWORK GYMNASTICS • MARTIAL ARTS Cinch Buckle Attachment Instruction Belt sewn to buckle here. START 1. Insert the strap into the underside of the buckle closest to where the belt is sewn to the buckle. 2. Wrap the belt around the slider bar and through and out the bottom of the buckle.
  • Page 2 Inspect warning labels and replace when marred or damaged. Before each subsequent use, re-check equipment stability and settings. SEE OTHER SIDE FOR CINCH BUCKLE ATTACHMENT INSTRUCTIONS REV 12/18/19...