Page 2
This product is supplied with a limited warranty. The product warranty covers failure of any Eurotech manufactured product caused by manufacturing defects. Eurotech will make all reasonable effort to repair the product or replace it with an equivalent alternative. Eurotech reserves the right to replace the returned product with an alternative variant or an equivalent fit, form and functional product.
Dependent on module installed Not Connected Reserved Use reserved to Eurotech, must remain unconnected Active low signal Warnings and Important Notices: Within this manual you will find the following tables, please ensure that you read and understand these as they are intended to highlight potential risks or precautions that should be taken.
Eurotech Technical Support Team: email: techsupp@eurotech.it RMA Requests Before returning any Eurotech product, for any reason, you must e-mail the Eurotech Technical Support Team on the above email address, giving the following information; you will then be sent an RMA number...
2-3: CAN Controller 2 Connect +12V from CPU Module to Pin 9 of Open: Not Connected 2 Pin Open Closed: Connected Connect Ground from CPU Module to the Open: Not Connected 2 Pin Open CAN Ground Closed: Connected An0066 Adaptor Reference Guide...
Page 10
+12 Volt CAN 2 Receive J2 Pinout Pin # Signal Not Connected CAN – Low CAN – High Not Connected Not Connected Ground Ground Not Connected Ext Voltage J3 Pinout Pin # Signal Eternal Power CAN Ground An0066 Adaptor Reference Guide...
Controller type Open / Open / Open 2.00mm Closed / Closed / Closed Intel Jumpers Realtek 8019AS / 8139C Closed / Closed / Open Realtek 8139D / 8139DL Closed / Closed / Closed Realtek 8019AS / 8139C An0066 Adaptor Reference Guide...
Page 13
The Value of Vcc on pin #1 can vary from 5V to 3.3V depending on the CPU module being used. J2 Pinout RJ45 Connector (Female) Pin # Signal + Transmit Data - Transmit Data + Receive Data Not Connected Not Connected - Receive Data Not Connected Not Connected An0066 Adaptor Reference Guide...
Page 14
Note on C1 and C3: These capacitors are useful for EMI compliance. Excessive capacitance can slow the 100 Mbps rise and fall times. Unless there is some overshoot in the 100 Mbps mode, these caps are not necessary. An0066 Adaptor Reference Guide...
Left Green Activity Link Up Blinking: Activity J1 Pinout Signal Signal MX-1 MX+1 MX-2 MX+2 MX-3 MX+3 MX-4 MX+4 Ground Not Connected Ground Not Connected Link LED 0 Activity LED1 Link 100 LED2 Link 1000 LED3 An0066 Adaptor Reference Guide...
Page 17
Adaptor kits J2 Pinout Signal + Bidirectional Data A - Bidirectional Data A + Bidirectional Data B + Bidirectional Data C - Bidirectional Data C - Bidirectional Data B + Bidirectional Data D - Bidirectional Data D An0066 Adaptor Reference Guide...
90-Degree mounting bracket Connectors Connector Type Pins Format Pitch (mm) CPU Interface Male Minitek 2.00 2x USB Ports USB Type “A” Power Input Male SIL 2.50 Jumpers Jumper Qty Pins Default Connects VDD1# to VDD2# Closed An0066 Adaptor Reference Guide...
Page 20
USB 2 + Data Lower USB 2 Ground Note: Port 1 is the Upper port and Port 2 is the Lower port J3 Pinout Signal External Power VDD1# External Power Ground External Power Ground Not Connected An0066 Adaptor Reference Guide...
Line Out Left Line In Left Microphone In Ground Ground Ground Vref Microphone Line Out Right Line In Right J2 Pinout Signal Signal Ground SData Out Bit Clock PC Beep Ground Reset Sync SData In AC97 Clock An0066 Adaptor Reference Guide...
26 dBi +/- 3 dBi 29 dBi Noise 2.0 dB Input Voltage 3.0 Vdc 7.0 Vdc Power Consumption 22 mA Operating Temperature Cable Length 4850mm 5000mm 5150mm Mechanical Specifications Characteristic Type Mounting Magnetic Cable Type UL1107 Connector Type An0066 Adaptor Reference Guide...
MX-3 AWG28 MX+3 AWG28 MX-4 AWG28 MX+4 AWG28 Iso Ground AWG28 Not Connected AWG28 Ground AWG28 +3VS AWG28 Link LED 0 AWG28 Activity LED 1 AWG28 Link 100 LED 2 AWG28 Link 1000 LED 3 AWG28 An0066 Adaptor Reference Guide...
CPU to USB Adaptor Connectors Connector # Type Pins Format Pitch (mm) Female Minitek 2.00 Female SIL 2.00 Pinouts Cn1 Pin # Cn2 Pin # Usage Ground + Data - Data Ground + Data - Data An0066 Adaptor Reference Guide...
Cable Descriptions 7030000083L: CPU to Timers, Serial 3 & 4 and Ethernet Adaptor Connectors Connector # Type Pins Format Pitch (mm) Female Hirose 40x2 1.25 Female Minitek 2.54 Female Minitek 2.54 Male Male An0066 Adaptor Reference Guide...
Page 32
Not Used Not Used Not Used DCD 1 DSR 1 RX 1 RTS 1 TX 1 CTS 1 DTR 1 RI 1 Ground 1 Ground 2 DCD 2 DSR 2 RTS 2 CTS 2 RI 2 An0066 Adaptor Reference Guide...
- Data White Twisted with Cn1 – Pin 16 + Data Green Twisted with Cn1 – Pin 13 + Data Green Twisted with Cn1 – Pin 14 Ground Black 1 & 5 Double Wire Ground Black An0066 Adaptor Reference Guide...
Twisted with Cn1 - pin #5 - Data White Twisted with Cn1 - pin #6 + Data Green Twisted with Cn1 - pin #3 + Data Green Twisted with Cn1 - pin #4 Ground Black Ground Black An0066 Adaptor Reference Guide...
Twisted with Cn1 – Pin 11 + Data Green Twisted with Cn1 – Pin 12 Black Ground Black - Data White Twisted with Cn1 – Pin 16 + Data Green Twisted with Cn1 – Pin 15 An0066 Adaptor Reference Guide...
Line Out Left White Right Line Out Right Shield Ground Cable Shield Left Microphone In White Right Microphone Vref Shield Ground Cable Shield Left Line In Left White Right Line In Right Shield Ground Cable Shield An0066 Adaptor Reference Guide...
Need help?
Do you have a question about the An0066 and is the answer not in the manual?
Questions and answers