Advertisement
How to Install
Filter
Note: Before using the lter, rinse it with clean water for two minutes to remove the oating carbon powder
generated by the collisions of the activated carbon during transportation.
1. Rinse the lter with clean water for two minutes to
remove the
oating carbon powder generated by the
collisions of the activated carbon during transportation.
3. Put the cover back onto the water tank.
2. Install the lter into the lter tray.
Standard Mode Indicator
4. Press and hold the lter reset button at the
bottom of the pet fountain for two seconds.
When the mode indicator turns white, the
remaining service life of the lter is reset.
02
Filter Tray
Filter
Smart Mode Indicator
Filter Reset Button
Advertisement
