jWIN JL-725 User Manual

MODEL : JL-725
1. AUTO/ON/OFF SWITCH
2. LED CLOCK DISPLAY
3. LED INDICATOR FOR "AUTO"
4. SNOOZE/SLEEP-OFF BUTTON
5. ALARM BUTTON
SET/OFF
6. TIME SET BUTTON
7. SLEEP SET BUTTON
8. (DIMMER) LOW/HIGH SWITCH
9. HOUR BUTTON
10. MINUTE BUTTON
11. VOLUME CONTROL
12. AM/FM SWITCH
13. TUNING CONTROL
14. BATTERY COMPARTMENT
15. FM PIG-TAILED
16. AC POWER CORD
17. AM/FM SCALE &
18. PROJECTION ON/OFF
19. CLOCK PROJECTOR
20. TIME SET BUTTON FOR PROJECTION
21. HOUR BUTTON FOR PROJECTION
22. MINUTE BUTTON FOR PROJECTION
23. FOCUS ADJUSTMENT
24. RADIO/BUZZ SWITCH
25. LED INDICATOR FOR "PM"

AC POWER OPERATION

Before conneting to the power
rating label on the bottom of the apparatus.

WARNINGS

Disconnect the power plug from the
do not remove the cover of the apparatus. There are no user serviceable parts inside. To prevent
fire or shock hazard, do not expose the apparatus to rain or moisture.

TO SET THE CLOCK TIME

1. Set the ON/OFF/AUTO switch (1) to
display will blink to indicate
2. To set the correct time, press the MINUTE button (10) or HOUR button (9) until the correct
time is displayed while pressing and holding the TIME SET button (6).
3. Open the Battery Compartment
store the information relating to
disconnection from the
continue to keep time but will not display it.
THE LED DIGITAL CLOCK AND THE PROJECTION

TIME SETTING FOR PROJECTION

- To set HOUR, press simultaneously the HOUR BUTTON (21) and the TIME
Keep them depressed until the
- To set MINUTE, press simultaneously the MINUTE BUTTON (22) and the TIME
Keep them depressed until the
- Focus setting : To adjust the projection
the projected time is clearly shown on the ceiling or wall.
NOTE : THE MAXIMUM PROJECTION DISTANCE IS 3-9 FEET.
KNOB
KNOB
WIRE
POINTER
BUTTON
KNOB
supply, ensure that the supply corresponds to the information on the
receptacle when not in use. To avoid the risk of electric shock,
'OFF'. Connect the power cord
a power interruption and that the display time is incorrect.
cover and fit a 9V battery. The purpose of this battery is to
the alarm time and to keep
power supply or power interrruption.
CLOCK MUST BE SET SEPARATELY
correct hour is displayed.
correct minute is displayed.
focus, turn the FOCUS ADJUSTMENT KNOB (23) until
25
to the power supply. The clock
the clock functioning in the event of
In case of the power failure, the clock will
SET BUTTON (20).
SET BUTTON (20).