Advertisement
Quick Links
QIG600035 Rev. D
INSTALLATION INSTRUCTIONS:
E353758 / E949536 mPOS PRINTER STAND WITH
EXPANSION MODULE FOR ANDROID
1
- Remove (2) screws (L &
R side) and pull-out printer
tray. Keep screws for re-
assembly.
2
- Place Expansion Module
into base.
Stand plate
3
– Route cables behind L
& R sides of stand plate.
Secure cables to stand with
tie-wraps; white band on
cables indicates correct
location to secure cables.
Attach points
for tie-wraps.
Pg.1
Advertisement
Summary of Contents for Elo TouchSystems E353758
- Page 1 INSTALLATION INSTRUCTIONS: E353758 / E949536 mPOS PRINTER STAND WITH EXPANSION MODULE FOR ANDROID Stand plate - Remove (2) screws (L & R side) and pull-out printer tray. Keep screws for re- assembly. – Route cables behind L & R sides of stand plate.
- Page 2 INSTALLATION INSTRUCTIONS: E353758 / E949536 mPOS PRINTER STAND WITH EXPANSION MODULE FOR ANDROID - Attach 15i/10i using (4) M4X6L screws. Plug in USB and PWR. cables, attach cable doors. Cable doors, L &R. M4X6L Screws, X4 - Insert compatible printer.
- Page 3 INSTALLATION INSTRUCTIONS: E353758 / E949536 mPOS PRINTER STAND WITH EXPANSION MODULE FOR ANDROID – Add (2) M4X8L Screws (provided with stand) to 1002. Leave gap under screw heads to allow 1002 to slide onto key holes on stand back. Optional rear-facing...
- Page 4 INSTALLATION INSTRUCTIONS: E353758 / E949536 mPOS PRINTER STAND WITH EXPANSION MODULE FOR ANDROID VESA Plate Cover Assembly for E949536 (Optional) NOTE –VESA Plate Cover is optional for the assembly, it will not affect the function and performance. – Remove the rubber before assembling the cover.