Kesser K-FHA-2090 Manual page 8

8
Step 3: Unfolding the Trailer
With the trailer frame lying flat, raise the side panels so that they are vertical.
Position the roll bar into place until the holes in the side panels and the holes on the ends of roll bar
are line up.(1)
(1) (2)
Hitching the Trailer on the Bicycle
NOTE: The universal hitch is only suitable for bicycle with full axle or/and with quick release axle.
1.Bicycles with Full Axle
Remove the left hand axle nut from the bicycle. Any spacers or washers can generally be retained.
Put the hitch on the axle and re-attach the nut.
WARNING: The axle nut must be tightened on the axle thread by at least 5 full turns, so that
adequate clamping force is ensured. A thread which is too short can result in accidental loosening of
the rear wheel and therefore cause serious injury or death. If i n doubt, contact your specialist dealer.
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Deutschland