Hotec H-U06C User Manual

Hide thumbs

User Guide

Hotec Wireless Microphone

Model: H

Model: H-U06C / H-U26C

H-U26C

Thanks for purchasing Hotec UHF Wireless

microphone, please read the following

instructions carefully before use.

carefully before use.

Email: support@sz

support@sz-tecson.com

Website: www.sz-

-hotec.com

FB page: https://www.facebook.com/Hotechome

https://www.facebook.com/Hotechome

Or scan the QR code

Hotec

is the registered trademark of Shenzhen Tecson Trade and Technology Co.,

Ltd.

Product Introduction

Hotec UHF wireless microphone works at

902-928MHz, total 32 selectable frequencies

for choice for H-U06C and 64 frequencies for

H-U26C, 32 for each channel. The handheld

microphone system with mini rechargeable

battery is perfect for vocal transmission over

PA, mixer console, PA speaker and amplifier.

The handheld microphone for H-U06C/H-U26C

is powered by AA batteries and the receiver is

battery.

Preparation Before Use

a) Charge and install battery for mini receiver

Open the battery compartment of the

receiver to check if the rechargeable battery is

installed in place. Make sure the receiver is

fully charged before use. Charging time for

H-U06

U06C

SYSTEM CONTENT

H-U06C

H-U06C Handheld microphone x 1

H-U06C Mini rechargeable receiver x 1

Charging cable x 1

H-U2618

AA battery x 2 (for microphone)

Rechargeable battery x 1 (for receiver)

Microphone foam x 1

Anti-rolling ring x 1

H-U26C

H-U26C Handheld microphone x 2

H-U26C Mini rechargeable receiver x 1

Charging cable x 1

AA battery x 4 (for microphone)

Rechargeable battery x 1 (for receiver)

Microphone foam x 2

Anti-rolling ring x 2

the mini receiver is about 4 hours. The

receiver works up to 10-15 hours after fully

charged.

When the battery is low, the battery indicator

becomes red. It is blue color during charge

and the light will be off after fully charged.

b) Install batteries for microphone

Open the battery compartment of the

Handheld Microphone, install the AA

batteries.

c) Check and make sure the microphone and

receiver are connected

Power on both mini receiver and the

handheld microphone. Make sure the mic and

receiver are paired. If you see the following

indicator color, the mic and receiver are

paired and you are ready to use after you

connect it to your audio device.

Table of Contents

Need help?

Do you have a question about the H-U06C and is the answer not in the manual?

Questions and answers

Summary of Contents for Hotec H-U06C

Page 1 Hotec UHF wireless microphone works at charged. 902-928MHz, total 32 selectable frequencies for choice for H-U06C and 64 frequencies for When the battery is low, the battery indicator H-U26C, 32 for each channel. The handheld becomes red. It is blue color during charge microphone system with mini rechargeable and the light will be off after fully charged.
Page 2 For H-U06C, when the RF indicator is green, Battery status indicator: When the battery is ② the mic and receiver are paired and ready to low, the indicator will become red. When use. charging, it is Red and the light will be off when it is fully charged.
Page 3 Step 3: Power on the microphone and receiver. >98dB When you see the RF indicator at the right color, Working Range Up to 100 feet you are ready to use. If not, follow the trouble RF Carrier Stability ±0.005% (-10℃-50℃) shoot steps to pair the receiver and microphone Receiver Spec.
Page 4 Android/iOS TRS cable (sold interference frequency to avoid smart separately). Contact with each interference. phones or Hotec seller support if other? DSLR you have difficult If you have several cameras for connecting it with sets of Hotec wireless There might...

This manual is also suitable for:

H-u26c

Hotec H-U06C User Manual

Table of Contents

SYSTEM CONTENT

Need help?

Questions and answers

Related Manuals for Hotec H-U06C

Summary of Contents for Hotec H-U06C

This manual is also suitable for:

Table of Contents