| General Elma Schmidbauer GmbH General About this manual NOTICE Please read the manual before using the unit. This manual forms part of the contents supplied with the unit. It must be kept in an accessible place close to the unit and must be retained with the unit if the unit is resold.
Elma Schmidbauer GmbH Proper use | Proper use NOTICE Only use the unit in accordance with the listed specifications. Using it in any other way is considered improper use. Ø The purpose of the unit is to dry objects after wet cleaning.
| Performance specification Elma Schmidbauer GmbH Performance specification • Drying objects with warm or cold air • Max. drying temperature 70 °C • Temperature of the cold air: room temperature • Automatic safety switch-off at excessive temperature • Quick and easy to operate using the rocker switch with three positions: OFF, HOT (hot air), COLD (cold air) •...
| General safety instructions Elma Schmidbauer GmbH General safety instructions Structure of the safety instructions SIGNALWORD Type and source of the danger Possible consequences of the danger if disregarded. Ø Measures to prevent the danger. Signal word Meaning Consequences if...
Elma Schmidbauer GmbH General safety instructions | Meaning of the symbols used Symbols on the unit: Read the manual Hot surfaces Symbols in the manual: Risk of electric shock Risk of explosion due to oxidising substances Note about damage to unit, or tip...
| General safety instructions Elma Schmidbauer GmbH Safety information on using the unit DANGER No explosion protection Very serious injuries, burns Ø Do not place the unit near flammable substances. Ø Do not dry objects with solvent adhered to them (alcohol, benzine etc.).
Elma Schmidbauer GmbH Product contents | Product contents Illustration 1: Elmadry TD product contents Network cable Elmadry TD Manual (not pictured) Optional accessories • Silicon mat to place on the bottom of the tank, prevents scratching of parts • Stainless steel basket in different sizes, for easy loading and unloading of the unit...
| Unit description Elma Schmidbauer GmbH Unit description Illustration 2: Front of Elmadry TD 300 1 Lid to cover the unit, or as a place to temporarily stand a stainless steel basket 2 Handle for transporting 3 Foot 4 Rocker switch for switching hot or cold air on or off...
Page 13
Elma Schmidbauer GmbH Unit description | Illustration 3: Rear of Elmadry TD 300 1 Mains connection for connecting with the network cable 2 Name plate shows the technical specifications for the unit 3 Dust filter (replaceable) prevents dust from getting into the tank through...
Page 14
| Unit description Elma Schmidbauer GmbH Illustration 4: Dryer tank of Elmadry TD 300 1 Tubular heater for heating the air 2 Wire mesh for protection of the blower system 3 Blower generates a stream of air to dry the parts...
Elma Schmidbauer GmbH Unpacking and mounting the unit | Unpacking and mounting the unit CAUTION Transport damage Electric shock Ø Do not put the unit and network cable into operation if they are damaged. Ø Contact the supplier or the shipper.
| Connecting the network cable Elma Schmidbauer GmbH Connecting the network cable DANGER Mains voltage Serious injuries or death from electric shock Ø Only use the original network cable. Ø Check the network cable for damage. Do not use a damaged network cable.
Elma Schmidbauer GmbH Operating the unit | Operating the unit CAUTION Hot surfaces Burns Ø Allow the unit to cool down or use suitable gloves when loading/ unloading objects. NOTICE To prevent overheating of the unit: Ø Do not use any other lid than the one supplied with the unit.
Page 18
| Operating the unit Elma Schmidbauer GmbH 4. To dry with hot air, set the rocker switch to "HOT". 5. To dry with cold air or cool the objects, set the rocker switch to "COLD". 6. To switch off the unit, set the rocker switch to "OFF".
To prevent dust particles getting onto the objects to be dried, clean or change the dust filter if it is soiled. The Elmadry TD 300 model has 2 dust filters. ü The network cable is unplugged. ü The unit has cooled down.
Page 20
| Maintenance Elma Schmidbauer GmbH 3. Remove the dust filter. 4. Insert a new dust filter, or clean and replace the old dust filter. 5. Replace the cover. 6. Turn the unit back to the upright position. ð The dust filter is ready for use again.
Elma Schmidbauer GmbH Troubleshooting | Troubleshooting NOTICE Repairs and maintenance work that require the unit to be opened may only be carried out by authorised electrical specialists. Ø Contact the manufacturer or supplier. Fault Possible cause Resolution Blower faulty, or blocked •...
| Disposal Elma Schmidbauer GmbH Disposal NOTICE To dispose of the unit, take it to a metal or electronics recycling facility or send it back to the manufacturer. 22 / 24 Elmadry TD...
Page 23
Elma Schmidbauer GmbH List of figures List of figures Illustrati Elmadry TD product contents..............on 1 Illustrati Front of Elmadry TD 300 ................on 2 Illustrati Rear of Elmadry TD 300................on 3 Illustrati Dryer tank of Elmadry TD 300..............
Page 24
List of tables Elma Schmidbauer GmbH List of tables Table 1 Meaning of the signal words................ Table 2 Troubleshooting................... 24 / 24 Elmadry TD...
Need help?
Do you have a question about the Elmadry TD and is the answer not in the manual?
Questions and answers