Advertisement
Quick Links
NOTICE!
No mixing valve will work satisfactorily if improperly installed. We suggest, therefore, that you read
these instructions carefully before installing and follow directions as outlined. Handle the mixing valve with care.
CAUTION: When maintaining and adjusting the
mixing valve, all fixtures should be isolated from
use. Lawler Manufacturing Co., Inc. recommends
that you work safely at all times and in a manner
consistent with the OSHA Lock/Tagout standard,
29 CFR 1910.147 and other applicable standards.
This installation & maintenance manual covers all
configurations of the Model 4000.
ASSE 1070 Approved
ASSE Lead Free Certified
Certified to CSA B125.3
INSTALLATION &
MAINTENANCE MANUAL
Design and specifications subject to change without notice.
Please refer to temperedwater.com to ensure most
current data sheet and other design solutions.
Series 4000
Exposed Thermostatic
Mixing Valve
CAPACITIES – GPM SERIES 4000
Pressure Drop PSI
5
Valve Size
1/2"
2-1/2
3/4"
5
B
82306_4205_SC6_DRW_NODIMS.pdf
C
DIMENSIONS
Valve Number
A
1/2"
1/2"
3/4"
3/4"
Dimensions are for reference purposes only. For rough-in dimensions
please refer to Lawler's Revit/BIM models found at temperedwater.com.
temperedwater.com
5330 East 25 th St.
Indianapolis, IN 46218
Phone (317) 261-1212
Fax (317) 261-1208
10
20
30
Capacity – GPM
3-1/2
5-1/2
8
8
10-1/2
15
A
B
C
1/2"
8"
3/4"
9-1/2"
temperedwater.com/patents
M 4000 E
45
10
20
Advertisement
Related Manuals for Lawler 4000 Series
Summary of Contents for Lawler 4000 Series
- Page 1 3/4” 3/4” 3/4” 9-1/2” Dimensions are for reference purposes only. For rough-in dimensions please refer to Lawler’s Revit/BIM models found at temperedwater.com. temperedwater.com/patents ASSE 1070 Approved Design and specifications subject to change without notice. ASSE Lead Free Certified M 4000 E Please refer to temperedwater.com to ensure most...
- Page 2 The thermostat can now be examined. Maintenance The Lawler thermostatic mixer should be checked periodically for proper operation and cleaning. See “INSPECTION AND CLEANING VALVE.” To test mixing valve for proper setting and operation—proceed as follows:...
- Page 3 Checking the Thermostat Thermostatic Shower Valve Cut-away If cold seat #9 on thermostat is worn or deeply indented, remove it and replace with a new one. If there is a question as to the thermostat being good, hold thermostat under cold water faucet and insert an eraser capped pencil into the center of thermostat.
- Page 4 GUARANTEE We guarantee the Lawler Mixing Valve to be free from def ects in workmanship and material, and for a period of one year from date of purchase, will replace any parts found by us to be defective. We will not be held responsible, however, for any labor incidental to, or for any damages caused by defective material.