Table of Contents
Advertisement
Quick Links
INSTRUCTIONS FOR USE
40790xx-1 Piranha Blox C1D1 Series
Self-Retracting Device
Complies with the current ANSI Z359.14-2012 and all
applicable OSHA regulations and requirements.
Control Dynamics Inc.
DBA Piranha-Safety
21 E Marine View Dr Ste G
Everett, WA USA 98201
Phone: 425-513-9014
Toll Free: 800-738-5004
Email: contact@piranha-safety.com
Page 1
Advertisement
Table of Contents
Summary of Contents for Piranha RELIANCE C1D1 Series
- Page 1 INSTRUCTIONS FOR USE 40790xx-1 Piranha Blox C1D1 Series Self-Retracting Device Complies with the current ANSI Z359.14-2012 and all applicable OSHA regulations and requirements. Control Dynamics Inc. Phone: 425-513-9014 Toll Free: 800-738-5004 DBA Piranha-Safety Email: contact@piranha-safety.com 21 E Marine View Dr Ste G...
-
Page 2: Table Of Contents
If you have questions INSPECTIONS on the use, care, or suitability of this equipment for your application, A. INSPECTION FREQUENCY ..................... 19 B. INSPECTION PROCEDURE ..................19 - 21 contact Reliance/Piranha-Safety Fall Protection for information. TRAINING RESCUE PLANNING SERVICING GUARDING AGAINST APPLICATION FAILURE... -
Page 3: Description
Fixed Anchor quired (i.e. inspection work, general construction, maintenance work, oil production, confined space work, etc.). The Piranha Blox SRL is designed ™ for use by a single person weighing up to 310 lbs [140kg] (body weight plus tools) *PLEASE NOTE - capacity is specific to lifeline model. -
Page 4: Product Specifications
Instructions for Use PRODUCT SPECIFICATIONS The following specifications apply to all Piranha Blox™ and ™ Self Retracting Lifelines and meet the Class B requirements of ANSI Z359.14-2012: The following specifications apply to all Piranha Blox™ Self Retracting Lifelines and meet the Class A requirements of ANSI Z359.14-2012: •... -
Page 5: Application
There must be sufficient clearance below the user to arrest a fall before the transferred to the body. The Interlocking feature of the Piranha Lox connector user strikes the ground or other obstruction. The clearance required is... -
Page 6: Swing Pendulum Falls
Instructions for Use RIGHT WRONG Figure 5 If an object is in his swing path (or that of the line) a hazardous situation exists. Two factors become evident in this situation: First, due to the swing fall, horizontal speed of the worker may be Figure 4 high enough to cause injury if an obstacle in the swing fall path is struck by either the user or the line (web). -
Page 7: Chemical Hazards
Any SRL that has been subjected to the forces of arresting a fall 7) CORROSION: must be immediately removed from service and marked as “UNUSABLE” until recertified or replaced. RELIANCE/PIRANHA- Do not expose the device to corrosive environments for prolonged periods. Organic substances and salt water are particularly corrosive SAFETY SRL’s have impact load indicators built into the anchorage... -
Page 8: Systems Requirements
C. Pull insert out of connector while all 3 gates are still depressed. A. COMPATIBILITY OF SYSTEM PARTS Electrical System Compatibility. The Piranha Blox intelligent SRL is capable of monitoring a tie off point to determine COMPATIBILITY OF COMPONENTS SUBSYSTEMS: Piranha Blox when it is in use. -
Page 9: Anchorages And Anchorage Connectors
2. Pass a large carabiner or bow shackle (or other Reliance approved connecting means) through the swivel eye or handle at the top of the Piranha Blox ™ . This carabiner or bow shackle must be rated with a minimum breaking strength of at least 5,000 lb (22.2kN) and must be used for connecting to only 1 SRL at a time. -
Page 10: Preparation For Use
SAFETY TASK ANALYSIS) B. PREPARATION FOR USE 1. Once the Piranha Blox ™ has been secured into position, extract a few Plan procedures to safely perform tasks when using any components of a feet of PFAS. - Page 11 Instructions for Use web line were extracted from the SRL. Obstacles that pose no exposed to a dangerous situation should he climb downwards or threat when a worker is on a platform, for example, may be moves laterally towards another work surface. WARNING! Do not use if inspection reveals an unsafe condition.
-
Page 12: Inspections
B. INSPECTION PROCEDURE the unit. A buildup of dirt, solvents, paint, etc. on the lifeline may prevent the SRL from working properly, and in severe cases degrade the 1) Prior to each use, the worker must inspect the Piranha Blox Self- ™... -
Page 13: Training
(Figures 11,). Once the load indicator has been deployed, the SRL equipment directly below the anchorage point which might create a swing must be returned to a Reliance/Piranha-Safety approved repair fall. facility for evaluation and recertification. Inspect load indicator webbing on SRL’s with web lifelines. -
Page 14: Rescue Planning
Piranha Blox ™ and or the connector. The cable, rope, or web line should be position along the worksite. -
Page 15: Labeling
6) Do not tie knots in the cable, rope, or web line of the unit. Tying knots in cable, rope, or web line reduces the overall strength of the wire rope. Only connect to the Piranha Blox ™ by using the 18" non-shock absorbing lanyard (P/N:999904-PL) to connect to the dorsal (back) D-ring of a full-body harness. - Page 16 Instructions for Use PRODUCT LABELS Page 30 Page 31...
- Page 17 Instructions for Use PRODUCT LABELS PRODUCT LABELS Page 32 Page 33...
-
Page 18: Inspection Record
Upon notice of product defect or fault, Reliance/Piranha-Safety Industries LLC will promptly repair or replace all defective items. Reliance/Piranha-Safety Industries LLC reserves the right to elect to have any defective item returned to its manufacturing plant, authorized service center or distributor for inspection before making a repair or replacement. - Page 19 Piranha Safety 21 E Marine View Dr STE G Everett, WA 98201 Phone : 425-513-9014 Toll Free : 800-738-5004 www.Piranha-Safety.com Copyright 2018 Piranha Safety 4000000-100 Rev - A Page 36...
- Page 20 Piranha Blox Instruction Manual Addendum 05/07/2021 The following procedure must take place after install of The Piranha Blox Intelligent Safety Retractable Device (SRD). During shipping the SRD wire rope can settle and create a layover condition on the drum. The following procedure will help reset the SRD wire rope on the drum for its intended vertical hanging position.
Need help?
Do you have a question about the RELIANCE C1D1 Series and is the answer not in the manual?
Questions and answers