Advertisement
Damage to labels shall be prevented by keeping them away from sharp edges of the load and, if possible, from the load.
9
The webbing shall be protected against friction, abrasion and damage from loads with sharp edges by using protective sleeves and/
9
or corner protectors.
2. INTRODUCTION
Manufactured from polyester webbing with stitched reinforcement around hooks. Suitable for securing loads and tarpaulins onto
flatbeds or trailers and for general load restraint. Simple cam buckle fastener tensions the webbing to provide superior load restraint
3. SPECIFICATION
Part No.
Breaking
TD2525CS
TD2550CS
TD05025CS
TD05050CS
4. OPERATION
NOTE: If unsure of requirements for specific application of Tie Down, seek professional advice.
4.1.
INSTALLING STRAP
4.1.1.
Depress the cam buckle lever (fig.1) and feed webbing between the lever and the buckle body.
4.1.2.
Manually pull the webbing through to remove as much slack as possible before releasing the lever to clamp the webbing.
4.2.
RELEASING THE STRAP
4.2.1.
Depress the cam buckle lever (fig.1) and loosen / remove the webbing from
the buckle body.
NOTE: For additional information see the Sealey YouTube channel.
5. MAINTENANCE
5.1.
After use, thoroughly wipe down the strap and the buckle body using a
soft,clean and dry cloth.
5.2.
Store the unit in a clean and dry environment.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
Original Language Version
© Jack Sealey Limited
Hook
Strain
250 kg
S-Type
250 kg
S-Type
500 kg
S-Type
500 kg
S-Type
01284 703534
Maximum
Webbing
Tension
Length
125 kg
2.5 m
125 kg
5 m
250 kg
2.5 m
250 kg
5 m
sales@sealey.co.uk
TD2525CS, TD2550CS, TD05025CS, TD05050CS
Webbing
Quantity
Width
25 mm
2
25 mm
2
25 mm
2
25 mm
2
fig.1
www.sealey.co.uk
Issue 1 19/11/21
Advertisement
