swamp LT-Par64 User Manual

Table of Contents

Download this manual

Please read over this manual before operating the light

Caution!

There are no user serviceable parts inside this unit. Do not attempt any repairs

yourself; doing so will void your manufactures warranty. In the unlikely event your

unit may require service please contact the manufacturer or your dealer.

PLEASE recycle the shipping carton when ever possible.

General Instructions

To optimize the performance of this product, please read these operating

instructions carefully to familiarize you with the basic operations of this unit. These

instructions contain important safety information regarding the use and

maintenance of this unit. Please keep this manual with the unit, for future

reference.



Multi-Colors



Color Strobe



Electronic Dimming 0-100%

LT-Par64

User Manual



Built in Microphone



DMX-512 protocol



Master/Slave synchronization

Table of Contents

Do you have a question about the LT-Par64 and is the answer not in the manual?

Page 1 LT-Par64 User Manual Please read over this manual before operating the light Caution! There are no user serviceable parts inside this unit. Do not attempt any repairs yourself; doing so will void your manufactures warranty. In the unlikely event your unit may require service please contact the manufacturer or your dealer.
Page 2  Daisy Chain Units Together in DMX Mode Safety Precautions  To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.  Do not spill water or other liquids into or on to your unit. ...
Page 3 （001—512）,7CH address code. A001 （001—512）,3CH address code. d001 （01—99）,7 Color jump effect. tb00 （01—99）, Color pulse change and gradual change effect. Zb00 （01—99）, Color combination effect change. ZH00 （01—99）, Sound active. JLbE r000 r000-r255,Red color dimming. G000 G000-G255,Green color dimming. b000 b000-b255,Blue color dimming.
Page 4 Unit not responding to DMX: 1. Check that the DMX cables are connected properly and are wired correctly (pin 3 is “hot”; on some other DMX devices pin 2 may be ‘hot’). Also, check that all cables are connected to the right connectors; it does matter which way the inputs and outputs are connected.