Page 1
SWDAB3 Information for use Intention For Use Thank you for purchasing this Bluetooth DAB/DAB+ Receiver from Streetwize. This product is intended for motorists that want to listen to their favourite DAB & DAB+ radio stations in their vehicle. This device also comes with Bluetooth connectivity for connecting your smartphone for answering &...
Product Elements 1. Streetwize Bluetooth DAB/DAB+ Receiver 2. DAB antenna 3. 3.5mm AUX cable Line In Headphone TF/Micro SD DAB Antenna Socket Card Slot Port Backward Forward LCD Display Switch between modes: DAB/BT/USB/TF TX/Scan Scan: Press to scan the full...
What Is DAB+? This in-car receiver receives DAB+ signal. DAB+ essentially uses the same technology as DAB, however the main difference is that DAB+ makes more efficient use of the available bandwidth so that it can send up to three times more data than a standard DAB signal. This allows for a better audio quality and also allows for more reliable reception.
Set Up & Installation Using the Adaptor Setting FM Frequency To Link The DAB Adaptor Recording Footage 1. With the DAB adaptor switched on, press & hold the TX SCAN button for the adaptor to prompt you to set the FM frequency to link the adaptor to your vehicle’s FM stereo.
Page 5
Scanning/Listening to DAB/DAB+ Radio Stations To scan and listen to DAB radio stations, please follow the instructions: 1. Press the Mode button until you enter DAB mode. 2. To seach for DAB/DAB+ stations, press the TX SCAN button and the adaptor will start to scan DAB/DAB+ stations.
Handsfree Calling When your phone is connected via Bluetooth, you can answer, reject, hang up and redial the last call via the adaptor. Please see Table 1 for instructions: Action Command Answer incoming call Short press Hang up current call Short press during call Reject incoming call...
Page 7
Charging Devices Via 12V USB Charge Ports This product comes with two USB charge ports that each provides a different ampage. The USB charge port located on the adaptor provides a 5V 2.4A charge and the USB charge port on the 12V plug provides a QC 3.0A charge.
Technical Specifications Product name Streetwize Bluetooth DAB/DAB+ Receiver Supplier code SWDAB3 Rated working voltage Radio Digital DAB/DAB+ Max Charge Out 5V/3.0A Voltage Input 9V to 26V Working temperature -10 to 70oC Music format TF card compatibility Up to 32Gb Bluetooth version v4.2...
Need help?
Do you have a question about the SWDAB3 and is the answer not in the manual?
Questions and answers