Advertisement
Quick Links
Advertisement
Summary of Contents for MRP TD4C
- Page 1 MEDREPPRO LLC Instruction Manual TD4C Tabletop Low Speed Centrifuge...
-
Page 2: Safety Notices
MEDREPPRO LLC Safety Notices We appreciate your business with our TD4C centrifuge. To prevent any potential accident, please operate centrifuges according to the following safety protocol. 1. Unplug the main power cord, when performing maintenance or when centrifuge is expected not being used for a long period of time. - Page 3 MEDREPPRO LLC ⚫ Model Type It is small & light tabletop low speed centrifuge ⚫ FUNCTION User will first put the centrifugal sample into the tubes, then put the tubes into this ordinary centrifugal instrument to make a physical separation as per the different densities of components of this sample based on setting certain centrifugal speed &...
-
Page 4: Operation
MEDREPPRO LLC ⚫ Installation: The centrifuge should be installed on a flat, stable surface. Most customers use a table or desk. When all four feet are touching the surface, connect the power supply to the unit and then plug it in. Make sure the socket is grounded, avoid an electric shock. - Page 5 MEDREPPRO LLC Picture1 Show as per Speed ⑨ ⑩ ⑦ ⑧ ⑥ A 1 ※3100 04∶39 START P/R SPEED/RCF TIME STOP ① ② ③ ④ ⑤ Name Function ①Program and rotor button (P/R) Control the program and rotor no. ②Selection button (SEL) Select Speed, RCF, time parameter ③Increase button (▲) Increase all the parameters...
- Page 6 MEDREPPRO LLC ❖ The parameters pre-selection 1) Set speed At first, Press ② “SEL” button, the position “A 1 ※3100” will be flicker in the digital window⑨, then Press speed button③/④(▲/▼)to adjust the speed. Range is 0rpm to 4000rpm. (rpm=rotations per minute). 2) Set the time Press ②...
- Page 7 MEDREPPRO LLC ⑨will show 0. Open the lid and take out the tubes. ❖ Open the lid Take out the tubes, centrifugation finished. ❖ Power off Push the switch down. The display panel is off, but the whole machine is still on.
Need help?
Do you have a question about the TD4C and is the answer not in the manual?
Questions and answers