Advertisement
PREPARING FOR INSTALLATION:
If you are installing the M-10KP into an existing wall, take time to consider any
possible obstructions which may be hidden inside the wall, such as wood or
metal studs, electrical, telephone or other types of wiring, plumbing, AC or
heating conduit. The M-10KP Keypad operates in conjunction with a M-4KP , giving
the end user direct access to a DSS Receiver, CD/DVD Changer, AM/FM Tuner or
any other component that requires a numeric address.
INSTALLATION:
1. Identify the Keypad wire. Label the wire for future reference.
2. Terminate the CAT5 wire with a RJ-45 connector.
3. Connect the terminated Keypad wire to the M-4KP Keypad terminal labeled
SYSTEM.
4. Locate the supplied CAT5 wire included in the M-10KP package.
5. Connect one end of the wire to the M-4KP terminal labeled ACCESSORY
KEYPAD.
6. Connect the other end of the cable to the M-10KP terminal labeled OUTPUT
7 . Install the M-4 KP and M-10KP into the device ring.
8. Fasten the cover plate
M-10KP INSTALLATION DIAGRAM
Category
5 Wire
Required
M-4KP
M-64 Multi-Zone
Receiver
TEN KEY MULTIZONE KEYPAD
1
2
3
4
5
6
7
8
9
--
0
+
RANDOM
GROUP
DISC
FAV
M-10KP
Category
5 Wire
Speakers
JOBSITE SYSTEMS
12331 SW 130 STREET
MIAMI, FL 33186
P 866.4JB.SITE (866.452.7483)
F 305.238.0185
WWW.JOBSITESYSTEMS.COM
©2004 Niles Audio Corporation. JobSite,
Pure Custom and Niles are registered
trademarks of Niles Audio Corporation
and the JobSite Logo is a trademark of
Niles Audio Corporation. JSM10KPPDF
Specifications subject to change without notice.
M-10KP
Advertisement
