Fujitsu Ten Eclipse TD307 II Owner's Manual page 25

Speaker base
Tip
• When installing the speaker base to the ceiling or
wall, vary the positions and number of screws used
in accordance with the strength of the ceiling or wall
and the locations of beams.
• When installing the speaker base to the ceiling or
wall, use the slits indicated by
screws (sold separately).
• When installing the speaker base to the wall or
ceiling, provisionally attach the speaker base to the
ceiling with tape to make work easier.
Screws (sold separately)
to insert the
- 9 -
9
Install the speaker base at the speaker installation
position using the screws (sold separately).
Caution
• Install the speaker neck and speaker base
securely so that the speaker will not fall down.
• The screws which are used to install the speaker
to the ceiling or wall are not provided with the
speaker, so purchase them separately.
• When installing the speaker base to the ceiling or
wall with the screws, do not tighten the screws too
tightly, otherwise it will bend the speaker base and
it may not be possible to attach the base cover.
Speaker base
Slits for securing
speaker base (width
0.2 in. [5 mm])