Yoli LITETREK 36 Assembly Instructions

LITETREK 36 7'
SET UP & TAKE DOWN INSTRUCTIONS
Parts Included: Fully Assembled Frame (1) Canopy Top with Integrated Wall (1) Backpack Carry Bag (1) Stakes (4)
SECURING THE CANOPY TOP TO THE FRAME
1
Place the canopy in the desired location (Fig. 1A).
2
Unfold the canopy top and place it over the open frame (Fig.3A). Secure each corner by attaching the corn
3
black fastening strip (Fig.3B). Pull all 4 corners down until completely over black fastening strip.
Your canopy top now secure to the frame.
Fig. 1A
SET UP
Place the canopy in the desired location for shade. Position one hand on any frame leg just below the black fastening strip and
1
place your other hand on the lower eaves bar as shown (Fig. 1A)
leg directly across bearing the weight clears the ground. Take steps backwards to open the frame as much as possible (Fig. 1B).
2
until it locks into position as
3
inner leg (Fig. 3A). Repeat for other 3 legs.
4
Secure integrated wall to frame by wrapping fastening strips around legs (Fig.4A). djust until taught.
Fig. 1A
THANK YOU FOR PURCHASING A YOLI INSTANT CANOPY!
Please carefully review the following instructions and familiarize yourself with parts included
and how to operate your YOLI canopy. Reference parts list for names of each part noted in instructions.
ₓ
7' INSTANT CANOPY
Fig. 2A
pictur (Fig.2A). Repeat on other 3 legs.
Fig. 1B
Fig. 3A
off the ground so all legs except the
Fig. 2A Fig. 3A
(Fig. 2A).
of the canopy top to the
Fig. 3B
slide out
Fig. 4A