Appendix C - Winc 2400C Specification - Teletronics International WINC 2400C Owner's Manual

Table of Contents

Advertisement

APPENDIX C - WINC 2400C Specification

Serial Interface
Async data rates (Kbps)
Async data format
Flow Control
Sync data rates (Kbps)
Connector
Compatibility
Radio
Frequency Band
Channelization
Modulation
Spread Spectrum
Sensitivity
Range
Antenna
Power
Primary Power
Internal Power Supply
1.2, 2.4, 4.8, 9.6, 14.4, 19.2, 28.8, 38.4
Data: 7, 8 bits, Parity: even/odd/none,
Stop bit: 1 or 2
XON/XOFF, RTS/CTS
9.6, 19.2, 38.4, 56.0, 57.6, 64.0, 72.0, 96.0, 128
Port 1: RS-232, DB-25 female (synchronous)
Port 2: RS-232, DB-9 male (asynchronous)
Hayes AT Command Set
2404-2483 MHz (transmit and receive at ISM band)
24 independent @ 4 MHz per channel (sync)
DQPSK
Direct-Sequence
-80dbm (not including spreading gain)
1 kilometer outdoors; 50 meters indoors
Rubber omnidirectional
100-250 VAC @50/60 Hz, 0.3-0.7A, auto-switching
28 Watts, AC
22

Advertisement

Table of Contents
loading

Table of Contents