Page 1
Under Surface Long Distance 10W Wireless CHARGhub Please read these instructions carefully before use www.chargitstore.com hello@chargitstore.com 0333 700 8889...
CHARGit Wireless Charger This wireless charger is compatible for all qi/MagSafe standard devices. Charging distance can reach up to a maximum of 30mm. Through wood, glass, acrylic, marble, granite and all other hard surfaces. WARNING: Please do not use through metal surfaces.
Installation Steps Select on your chosen surface where you will position your wireless charger (We suggest that you test that a compatible phone can charge through the surface before proceeding). Stick the marker sticker and place one magnet in the center. On the underside of the surface align the second magnet with the first and place the marker template over the magnet.
Page 5
For Surfaces Thicker Than 30mm For surfaces more than 30mm thick we advise to route an area of 150mm x 140mm to hold the charger. Please ensure you position the charger to allow room for the power cable before securing the bracket. Minimum Surface qi/MagSafe Thickness 15mm...
Power Indicator Lights Power On Red Light Charging Green Light Abnormal (FOD) Flashing Warnings Install the charger according to the instructions. Do not install the charger under any metal object. Do not place any metal objects or magnetic fields such as credit debit cards etc onto the charging area.
Remove your case from your phone. Ensure the charger is secured into the fixing bracket, power adapter is connected and switched on. Product Specification Name Long Distance Wireless Charger Model No. CIS06B Input 29V 1A Wireless Output 10W/7.5W/5W Charging Distance 15-30mm (coil to coil)
The images in this manual are for illustration purposes only, the actual product may vary. • In accordance with the FCC rules, this equipment has been tested and found to comply with the limits for a Class B digital devices. This equipment may cause interference to other equipment if not installed and used in accordance with these instructions.