Advertisement
INSTALLATION INSTRUCTIONS
1. Select an installation position or place that can endure more than 4 times of the total weight
of the installation structure.
2. At least 250mm or more of spare height is required above the CEILING BOARD.
3. CEILING BOARD's thickness should be less than 40mm.
4. Be sure to secure the SAFETY WIRE to avoid a product fall.
5. If you want to attach the camera to the ADAPTOR, use the only provided SCREWS.
INSTALLATION (indoor type)
1. Place the TEMPLATE on the CEILING BOARD and drill a guided hole.
❶
Remove the round filling ("C") from the TEMPLATE.
➋
Place TEMPLATE A onto the CEILING BOARD to which you will attach the ceiling
mount ADAPTOR and drill a hole of Ø165mm in diameter.
See the figure below for the hole shape.
Ø165mm
형판
TEMPLATE
4_ SHD-3000F2
SHD-3000F2-ENG-150319.indd 4
250mm 이상일 것
More than 250mm
천장보드
CEILING BOARD
40mm 이하일 것
Less than 40mm
165
Ø
mm
천장 보드
CEILING BOARD
2015/3/19 15:09:33
Advertisement
