Page 1
Panel Meter Digital Model:EPM5800-E User Manual Explanation Board and Wiring Connections: Wiring Instructions: 1. From the back of the meter, the left leg 1, connect 2 AC85V ~ 265V; Left terminal 3,4 connect the input of the drive power. 2. From the back of the counter, the right terminal 1,2 connect the driver output, 1 is...
Page 2
The wires must be connected as described above method, or it may cause damage to the tester. Note: EPM5800-E is not a shell. There is a high voltage when powered, prohibiting any part of the body contacting the circuit board.