Page 2
Introduction The Bike Mount for the Osmo provides a secure and stable platform to mount the Osmo on your bike's handle bar. Dimensions: 114 mm × 79 mm × 29 mm...
Page 3
Installation 1. Loosen the lever to open up the clamp. 2. Choose the appropriate sized rubber ring to wrap around your bike’s handle bar. Large Medium Small 3. Attach the clamp around your bike’s handle bar and tighten the lever to secure. Ensure the vibration damper is perpendicular to the ground to attain optimal stabilization.
Page 4
4. Attach the Osmo handle to the Bike Mount's rosette mount and tighten the knob to secure. WARNING Ensure the Osmo and Bike Mount are secure and will not fall off. Be observant and check for signs of looseness during your ride. The content is subject to change.