Page 1
INTRODUCTION Included with your purchase: Freedom III Tri-Connect Wireless Headset User Manual Base & Headset Telephone cord Power Adapter USB cord included with PC version only Assemble headband Multi-Connectivity Telephone - PC - Bluetooth Clip the headband on the headset. And rotate the microphone boom arm to your...
Page 2
Base Station (Front & Left side) Positioning a Headset Microphone Holding the headset, rotate the headband to bring the boom close to your mouth. Place the microphone element to the side of your mouth to avoid noise from breathing. ...
Page 3
Base Station (Back side) Visual Headset Window Handset port Bluetooth PC/TEL Microphone Telephone port Button Button Mute button DC Jack BusyLight Jack AUX port Visual Indicator Charging Status LED Indicator (Headset) Visual Window(Base) Charging Red LED : ‘ON’ White Full Charged Blue LED: ‘ON’...
Page 4
Plug the USB cable to the port on the left side of base unit. Connect the USB cable to any free USB port on the PC. The Freedom III is optimized for Skype for Business and supports Skype, Avaya One-X agent, Cisco Jabber, Bria(X-Lite) and 3CX softphones with SoftLink program.
Page 5
Bluetooth Usage (Only for Voice Connection) On the base top case, the Bluetooth button can be found. When this button is pressed, the blue LED is blinking, and the base station is on Bluetooth pairing mode. Additional Accessories To make pairing with smartphone, PC, Freedom Handset Lifter or any other Bluetooth host device, you should put The Freedom Handset Lifter remotely lifts the desk phone handset...
Page 6
Trouble Shooting 1. Cannot hear a dial tone. ☞ Check the PC/TEL button. TEL Mode: PC/TEL indicator – ‘OFF’ ☞ Please check the cable connection between Base Unit and Phone. ☞ Check that the power adapter is plugged in and has power ☞...
Need help?
Do you have a question about the Freedom III and is the answer not in the manual?
Questions and answers