Advertisement
Read this manual carefully for it has been produced to assist you in the correct operation, maintenance and
care of your BELL EQUIPMENT machine. Failure to do so could result in personnel injury or equipment
damage.
This manual should be considered a permanent part of your machine and should remain with the machine
when you sell it.
Right and left hand sides are determined by facing in the direction of forward travel.
Write product identification numbers (P.I.N.), Vehicle Identification Number (V.I.N.) and serial Number in
Chapter 9. Accurately record all the numbers to help in tracing the machine should it be stolen. Your dealer
also needs these numbers when you order parts. File the identification numbers in a secure place off the
machine.
Warranty is provided as part of BELL EQUIPMENT'S support program for customers who operate and
maintain their equipment as described in this manual. The warranty is explained on the warranty certificate
which you should have received from your dealer.
Should the equipment be abused, or modified to change its performance beyond the original factory
specifications, the warranty will become void and field improvements may be denied.
This manual is divided into chapters. The information contained in the manual is in logical sequence, with
the instructions written in step by step format.
Effective maintenance on your BELL EQUIPMENT machine is achieved when personnel fully understand
the information contained in this manual.
Every effort has been made to ensure that the information contained in this manual was correct at the time
of publication. BELL EQUIPMENT Co. has a policy of continuous product development, improvement, and
design. BELL EQUIPMENT Co. reserves the right to change, amend and update the design of its product
at any time without prior notice. With this policy, changes may have occurred that are not included in this
manual.
Whilst every endeavour has been made to provide accurate and reliable information, BELL EQUIPMENT
Co. specifically disclaims any actual or implied warranty and under no circumstances shall be liable for any
loss, damage or injury to person or property suffered, whether direct, indirect or consequential, arising from
the use of this manual. In particular and without detracting from above, the disclaimer also applies in the
event of any specification, warning, or representation contained in this manual being inadequate,
inaccurate, or unintentionally misleading.
The user is urged to strictly comply with the instructions and warnings that are given in the interests of
general safety. Please do not hesitate to contact your BELL EQUIPMENT
whenever you have a query on your BELL EQUIPMENT product or this manual.
The following address list was correct at 2 May 2001.
GROUP OPERATIONS LISTING
RICHARDS BAY (HEAD OFFICE)
Carbonate Cell .................................... Tel: (035) 907 9111 ..................................Private Bag X20046
Alton.................................................... Fax: (035) 907 4323 .................................EMPANGENI
RICHARDS BAY ................................. Web site: www.bellequipment.com ...........3880
3900
INTRODUCTION
P
roduct Support Representative
9
Advertisement
