Advertisement
Important Safety Information
1.
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2.
Keep children and bystanders away
while using this product. Distractions
can cause you to lose control.
3.
Stay alert, watch what you are
doing and use common sense when
using this product. Do not use this
product while you are tired or under
the influence of drugs, alcohol or
medication. A moment of inattention
while using this product may result
in serious personal injury.
4.
Use safety equipment. Always wear
eye protection. Safety equipment
such as non-skid safety shoes,
hard hat, or heavy-duty work gloves
used for appropriate conditions
will reduce personal injuries.
5.
Do not overreach. Keep proper
footing and balance at all times.
This enables better control of this
product in unexpected situations.
6.
Dress properly. Do not wear loose
clothing or jewelry. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
7.
Do not force this product. Use the
correct product for your application.
The correct product will do the
job better and safer at the rate
for which it was designed.
8.
Store this product out of the reach
of children and do not allow people
unfamiliar with the product or these
instructions to operate the product.
This product could be dangerous
in the hands of untrained users.
Page 2
For technical questions, please call 1-888-866-5797.
9.
Maintain this product. Check for
misalignment or binding of parts,
breakage of parts and any other
condition that may affect the
product's operation. If damaged,
have this product repaired before
use. Many accidents are caused
by poorly maintained equipment.
10. Use this product in accordance with
these instructions and in the manner
intended for this particular type of
product, taking into account the
working conditions and the work to
be performed. Use of this product for
operations different from those intended
could result in a hazardous situation.
11. Maintain labels and nameplates
on the Inner Tie Rod Tool. These
carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
12. Wear ANSI-approved safety
goggles and heavy-duty work
gloves when using this product.
13. Turn off the vehicle's engine and
refer to the vehicle's service and
repair manual for instructions on
how to safely secure the vehicle
in place with jack stands.
14. The warnings, precautions,
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur.
It must be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.
Item 58391
Advertisement
