MADRAX GRIDRAC GR110 Assembly Instructions

GRIDRAC GR110-112
ASSEMBLY INSTRUCTIONS
Step 2
Fig. 1
Step 3
Step 1
Pole
Lock Nut
Check parts list to ensure that you have received all the parts.
Step 1. Insert Bolt upward through last hole in Leg and Pole. Fasten loosely with
Lock Nut. Repeat by attaching other Leg to Pole.
Step 2. Insert Bolt through hole at the top of the Leg and end of Grid. NOTE: Grid
must be positioned such that the holes align with Leg holes. See Figure 2.
Fasten loosely with Lock Nut. Repeat by attaching other Leg to Grid.
Step 3. Align bottom holes of Grid with middle hole of Legs. Insert Bolt upward
and fasten loosely with Lock Nut. Repeat by attaching other Leg to Grid.
Step 4. Insert Bolt upward through remaining hole in Leg and other Pole. Fasten
loosely with Lock Nut. Repeat by attaching other Leg to Pole.
Step 5. Complete assembly by tightening all fasteners.
CONFIDENTIAL DRAWING AND INFORMATION IS NOT TO BE COPIED OR DISCLOSED
TO OTHERS WITHOUT THE CONSENT OF GRABER MANUFACTURING, INC.
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
©2013 GRABER MANUFACTURING, INC. ALL PROPRIETARY RIGHTS RESERVED.
GR110 8 Bike Double Sided
Grid
Step 2
Step 3
Step 1
Bolt
Plastic Shipping Caps
Leg
Step 4
GRABER MANUFACTURING, INC.
P(800) 448-7931, P(608) 849-1080, F(608) 849-1081
WWW.MADRAX.COM, E-MAIL: SALES@MADRAX.COM
GR112 18 Bike Double Sided
Step 2
Step 2
Parts List
Part
Legs
Grid
Poles
3/8"-16x3 1/2" Hex Bolt
3/8"-16 Lock Nuts
MADRAX DIVISION
1080 UNIEK DRIVE
WAUNAKEE, WI 53597
Fig. 2
Quantity
2
1
2
8
8
MADE IN U.S.A.
PRINTED IN U.S.A.
BLUE, 7-24-13, SMC