Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Globalmediapro Manuals
  4. Microphone system
  5. IP09CPHK
  6. User manual

Globalmediapro IP09CPHK User Manual

Ip/ poe transmission
Hide thumbs

Advertisement

Quick Links

Download this manual
IP/ PoE Transmission
User Manual
0

Advertisement

loading
Need help?

Need help?

Do you have a question about the IP09CPHK and is the answer not in the manual?

Questions and answers

Summary of Contents for Globalmediapro IP09CPHK

  • Page 1 IP/ PoE Transmission User Manual...
  • Page 2 Model： IP09CPHK 90W 4 Port Long Reach PoE Extender over Coax...
  • Page 3 Introduction IP09CPHK is a 4 port PoE (Power over Ethernet) switch that can use a coaxial cable to extend TCP/IP signal and huge amount of power to enable remote PoE devices. It's a perfect solution for large-scale environment, such as enterprises, road intersections and factories.
  • Page 4 Diagram Power from a PoE Switch Power from a Power Adapter at IP09CPR Power from a Power Adapter at IP09PH...

  • Page 5: Panel View

    Panel View Interface Function To indicate the power status. Uplink To indicate the uplink status. Overload To indicate the status of PoE load. Link 1-4 To indicate the link output status. PoE 1-4 To indicate the PoE connection status. Uplink Switch To switch uplink interfaces.
  • Page 6 Interface Function Power Jack To connect with a DC48 ~ 56V adapter. Power LED To indicate the power status. PortMode LED To indicate the status of port Mode. PortMode LED To indicate the status of port Mode. Jumper Reserved. DIP Switch To switch modes.
  • Page 7 Description 1 – LED Indication IP09PH LED Indicators LED Blinking Front LED Color Function LED OFF LED ON Green (On) Power Status Power OFF Power ON 10Mbps Blue (Uplink) Uplink Status Unlinked 100Mbps Red (Overload) Overload Status Normal Power Overload Data Transferring Green (Link) Port 1-4 Status...
  • Page 8 Description 2 – RJ45 Pinout IP09PH Port 1-4 Color Data Orange-white PoE+ (Data Pair) Orange PoE+ (Data Pair) Green-white PoE- (Data Pair) Blue PoE+ (Spare Pair) Blue-white PoE+ (Spare Pair) Green PoE- (Data Pair) Brown-white PoE- (Spare Pair) Brown PoE- (Spare Pair) IP09PH Uplink Color Data...
  • Page 9 Blue-white Power+ Green DATA2 - Power- Brown-white Power- Brown Power- IP09CPR Color Data Orange-white TX+ (DATA1+) PoE+ (Data Pair) Orange TX- (DATA1-) PoE+ (Data Pair) Green-white RX+ (DATA2+) PoE- (Data Pair) Blue PoE+ (Spare Pair) Blue-white PoE+ (Spare Pair) Green RX- (DATA2-) PoE- (Data Pair) Brown-white...
  • Page 10 Description 4 – Transmission Performance Refer to the charts below to find the power amount in different distances (the distance is measured from IP09CPR to IP09PH). Cable Power Source 200M 400M 100M 300M 500M Network Bandwidth 100Mbps 100Mbps 100Mbps 100Mbps 100Mbps Power Output (IP09PH) RG6U...
  • Page 11 PSE & PD Chart Class Standard IP09PH Output PD Input Class 0 15.4W 12.95W Class 1 3.84W IEEE 802.3af Class 2 6.49W Class 3 15.4W 12.95W Class 4 IEEE 802.3at 25.5W Class 5 Class 6 IEEE 802.3bt Class 7 Description 5 – Uplink Switch Setting Switch Function RJ45...
  • Page 12 Description 6 – Jumper Setting ※ Improper adjustment may damage the devices. Turn off the power and unplug all cables before adjustment. ※ Function Settings Description Jumper cap on pin 1 & 2 Enable (Default) Voltage Boost Jumper cap on pin 2 & 3 Disable Jumper cap on pin 1 &...
  • Page 13 Jumper cap on pin 2 & 3 Mid-spin Jumper cap on pin 1 & 2 End-spin (Default) P15 & Port 4 PoE Jumper cap on pin 2 & 3 Mid-spin Caution Using a 56V power adapter to avoid power loss in long distance transmission is recommended. Using copper clad steel and stranded cables may compromise the performance of power transfer.
  • Page 14 Package Item IP09PH x 1 pc IP09CPR x 1 pc Screw x 6 pc Wall Plug x 6 pc Rubber Pad x 1 bag...

  • Page 15: Specification

    Specification Model IP09PH IP09CPR Compliance IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3 N-Way Auto-Negotiation Standard IEEE 802.3x Full Duplex Operation and Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus Network Bandwidth 10/ 100Mbps 10Mbps@1000M Max.
  • Page 16 Installation Guide Step 1 – Drill 2 holes on a platform and insert 2 wall plugs in Step 2 – Put 2 screws into the plugs leaving 2mm distance from the wall...
  • Page 17 Step 3 – Fit IP09PH in the position corresponding to the screws Step 4 – Move downwards to get fixed...