Page 2
Assembly Instructions We have designed our furniture with you,the customer in mind.Our clear, easy to follow step by step instructions will guide you through the project from start to finish. Feel confident that this will be a fun and rewarding project. The final product will be a quality piece of furniture that will go together smoothly and give years of enjoyment.
Page 6
Step 1 Screw Cam Bolt (A) into Left Panel (7) and Right Panel (8) Cam Bolt 8 pcs Gently screw cam bolt into the threaded anchor. Step 2 Note: Two gliders are respectively mounted on both sides of the Support Bar (4), take extra care to distinguish two gliders! Right Left Screw...
Page 7
Step 4 Screw 1 pc Wooden Dowel 1 pc Attach Support Bar (5) to Support Bar (4) using Wooden Dowel (Q) and Screw (K) Step 5 Attach Bottom Support Bar (6) to Bottom Panel (2) using Screw (K) Screw 2 pcs Step 6 Insert cam lock with arrow pointing down.
Page 8
Step 7 Cam Lock 4 pcs Bolt 3 pcs Lock Nut 3 pcs 1.Attach Back Support Bar (3) and Support Bar (5) to Right Panel (8) using Cam Bolt (A) and Cam Lock (B) 2.Attach Bottom Panel (2) and Support Bar (6) to Left Panel (8) using Screw (L) and Lock Nut (N) 1.
Page 9
Step 9 Screw Cam Bolt (A) into Top Panel (1) Cam Bolt 8 pcs Step 10 Attach Top Panel (1) to the unit using Cam Bolt (A) and Cam Lock (B) Cam Lock 8 pcs...
Page 10
Step 11 Screw 6 pcs Left Slider 1 pc Right Slider 1 pc 1 Attach left Slider (G) to Left Drawer Side Panel (9) using Screw (D) 2 Attach Right Slider (H) to Right Drawer Side Panel (10) using Screw (D) Step 12 Attach Left Drawer Side Panel (9) and Right Drawer Side Panel (10) to Drawer Back Panel (11) using Screw (K)
Page 11
Step 14 Screw 6 pcs Left Slider 1 pc Right Slider 1 pc 1 Attach left Slider (G) to Left Drawer Side Panel (9) using Screw (D) 2 Attach Right Slider (H) to Right Drawer Side Panel (10) using Screw (D) Step 15 Attach Left Drawer Side Panel (9) and Right Drawer Side Panel (10) to Drawer Back Panel (11) using Screw (K)
Page 12
Step 17 Attach drawers to the unit Step 18 Anchor Screw Anti-tip Bracket Screw 1. Attach Anti-Tip brackets (P) to Top Panel (1) using Screw (O) 2.Drill holes into wall slightly smaller than Anchor (M) 3.Gently tap Anchor (M) into the wall 4.Fasten Anti-tip Brackets (P) to the wall using Screws (K)
Need help?
Do you have a question about the ST180005 and is the answer not in the manual?
Questions and answers