Advertisement
Instructions for flat objects:
•
Press the power button located on the handle (as seen in the diagram above) once for the white
LED function.
•
Pull out the optical lens to the magnification level needed as marked in the diagram below.
•
Press the power button twice to turn the magnifier off.
Instructions for irregular objects:
•
Remove the transparent cover from the bottom of the magnifier.
•
Press the power button located on the handle (as seen in the diagram above) once for the white
LED function.
•
Press the power button twice to turn the magnifier off.
Instructions for detection:
•
Press the power button located on the handle (as seen in the diagram above) twice for the purple
LED function.
•
Place flat on the surface and extend the optical lens as needed.
•
Press the power button once to turn the magnifier off.
•
For all uses the light functions will work with the handle extended and closed.
Battery Replacement:
•
To replace the batteries, unscrew the case at the back of the handle and remove the old batteries
(see diagram below).
•
Insert 4 x. 4LR1130 batteries.
•
Replace the battery cover.
Advertisement
