Advertisement
Available languages
Available languages
Quick Links
LED FLOODLIGHT
MODEL: FL14NT50-48
FL17NT50-48
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions. Failure to do so
may lead to electrical shock or fire, which may cause injury or death.
________
CAUTION
WARNING – RISK OF FIRE: Turn off the main power at the circuit
breaker before installing the fixture, changing lamps, or performing
other maintenance in order to prevent possible shock.
_________
GENERAL
All electrical connections must be in accordance with local, and
national electrical codes.
Prior to installation remove all protective plastic film covering from
the fixture.
For questions, problems, or missing parts call the Customer Service
line at (855) 573-6156 from 8 AM to 6 PM EST, Monday- Friday.
Tools needed for installation: Phillips screwdriver,
Hardware Included: 3 Wire Nuts,
_____________________________
ASSEMBLY AND INSTALLATION
1. Turn the power off at the circuit breaker box or remove fuse. Note: This fixture is
operating at 120Vac only.
2. Thread the fixture wires through the canopy (A, not included). Then screw the
fixture head (B) into the canopy (A).
3. Pull the power supply wires out from a outlet box (C). Connect the fixture ground
wire and the supply ground wire together using a wire nut (D). Attach the white
supply wire to the white fixture wire and the black supply wire to the black
fixture wire using wire nuts (D). Add a cable tie below each wire nut to provide a
more secure connection.
4. Carefully, tuck all the wires and wire connections into the outlet box (C). Secure
the fixture to the outlet box (C) using two mounting screws (E).
5. Loosen the screw (F) on the neck of the fixture to adjust the vertical position of the
light. Tighten the screw to secure position.
6. Loosen the lock nut (G) on the neck of the fixture to adjust the horizontal position
of the light. Tighten the nut to secure position.
7. Add silicone caulking (not included) around the perimeter of the canopy for
moisture seal.
8. Turn the circuit breaker back on.
E
B
C
G
A (Not Included)
F
D
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Envirolite FL14NT50-48
- Page 1 2. Thread the fixture wires through the canopy (A, not included). Then screw the fixture head (B) into the canopy (A). MODEL: FL14NT50-48 FL17NT50-48 3. Pull the power supply wires out from a outlet box (C). Connect the fixture ground wire and the supply ground wire together using a wire nut (D).
- Page 2 2. Pase los cables del alimentación a través de la cubierta (A, no incluido). Luego, atornille el cabeza del luminaria (B) en la cubierta(A). MODEL: FL14NT50-48 3. Pase el cable principal de alimentación desde una caja de distribución (C). FL17NT50-48 Conecte el cable negro de alimentación con el cable negro del luminario...
Need help?
Do you have a question about the FL14NT50-48 and is the answer not in the manual?
Questions and answers