Download Print this page

Kiloview RU-03 Quick Start Manual

Frame

RU-03 Frame

Quick Start Guide

2021

REV. 1

Thanks for your purchasing! Before using this product, it is recommended that you read the

guide carefully. To ensure your personal safety and avoid physical or electrical damage to the

device, please strictly follow the instructions of this guide or install and use it under the guidance

of professionals. Incorrect electrical connections or physical installation may cause permanent

Table of Contents

Need help?

Do you have a question about the RU-03 and is the answer not in the manual?

Page 1 RU-03 Frame Quick Start Guide 2021 REV. 1 Thanks for your purchasing! Before using this product, it is recommended that you read the guide carefully. To ensure your personal safety and avoid physical or electrical damage to the device, please strictly follow the instructions of this guide or install and use it under the guidance...
Page 2 damage to the device and even threaten personal safety. The 3U rack mount is a plug-in structure, which can replace and mix plug-in cards easily, combining 1-16 channels and multi-interface, encoding/decoding mixed solutions. It is equipped with dual power adapters. 1.
Page 3 No power supplied or device PWR1/PWR2 failure power light Red light always on Working Not enabled, not insert the card or the card works abnormally Card working light Green light always on The card is working 3. Power components Power specifications: 110w power module components 4.
Page 4 parallel 1. Align and push the power in 2. Tighten the left and right screws Note: The two power components work uninterrupted at the same time. When one of the components is powered off or damaged, the device will not be powered off.
Page 5 1. Align and push the encoding card in 2. Tighten the upper and down screws...