Page 2
English - How to use this manual Nederlands - Gebruik van deze handleiding For best results, reference both the text and illustrations. Voor de beste resultaten moet u zowel de tekst als de illustraties raadplegen. Gebruik de stippellijnen om uw taal bij de illustraties English Text Pages 3-15 te plaatsen.
Page 3
Русский - Как пользоваться данной инструкцией Для получения наилучшего результата ориентируйтесь как на текст, так и на иллюстрации, приведенные в данном руководстве. Отрежьте по пунктирной линии, чтобы совместить нужный язык с иллюстрациями. Русский текст: стр. 48-51 Polski - Jak używać tej instrukcji W celu uzyskania najlepszych rezultatów, korzystając z tej instrukcji, należy zwrócić...
English Notes This product is only compatible with the 2nd and 3rd generation iPad® tablets - including iPad® tablets in a smart cover. CAUTION: Avoid potential personal injuries and property damage! Do not use this product for any purpose not explicitly specifi ed by manufacturer. If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service or call a qualifi ed contractor.
Page 5
Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! 8-32 x 1/2 in.
Page 6
Under Cabinet 6 mm (1/4 in.) Unfold the arm [02] to expose the attachment Carefully drill holes using a 6 mm (1/4 in.) holes. Mark the hole locations. diameter drill bit through the bottom of the cabinet. NOTE: Cabinet thickness must not be less than 7/16 in.
Page 7
Use a hammer to install the three prong t-nuts Use the cabinet mounting screws [03] or [04] [05] into the holes in the upper surface of with the 3/32 in. hex key [10] to attach the arm the cabinet. Use care not to damage cabinet [02] to the underside of the cabinet.
Wall Mount Solid Concrete or Concrete Block 6 mm (1/4 in.) Unfold and level the base of the arm [02] and mark CAUTION: Avoid potential injuries or the hole locations. property damage! Pilot holes MUST be drilled to a depth of CAUTION: Avoid potential injuries or property 63.5 mm (2½...
Page 9
Insert anchors [08] into drilled holes. CAUTION: Improper use could reduce the holding power of the mounting screw [06]. To avoid potential injuries or property damage: DO [08] NOT over-tighten the mounting screw [06]. [06] [08] [06]...
Page 10
Wall Mount Wood Stud 3 mm (1/8 in.) Verify the center of the stud using an awl, a thin nail, Unfold and level the base of the arm [02] and mark the hole locations. or an edge to edge stud finder. CAUTION: Avoid potential personal injuries and property damage!
Page 11
CAUTION: CAUTION: Avoid potential injuries or Improper use could reduce the property damage! Pilot holes MUST be drilled holding power of the mounting screw [06]. To avoid potential injuries or property damage: DO to a depth of 63.5 mm (2½ in.) using a 3 mm (1/8 in.) diameter drill bit.
Page 12
Wall Mount DryWall 10 mm (3/8 in.) Unfold and level the base of Make sure to position the mount in the space between two studs. the arm [02] and mark the hole locations. CAUTION: Avoid potential personal [02] injuries and property damage! Any material covering the wall must not exceed 16 mm (5/8 in.).
Page 13
CAUTION: CAUTION: Avoid potential injuries or Improper use could reduce the property damage! Pilot holes MUST be drilled holding power of the mounting screw [06]. To avoid potential injuries or property damage: DO to a depth of 38 mm (1½ in.), using a 10 mm (3/8 in.) diameter drill bit.
Page 14
Install iPad® in Holder Attach Holder to Arm Press the iPad® into the holder [01] making sure Place the center ring of the holder [01] onto the the corners of the holder [01] fi t over the corners faceplate of the arm [02]. The holder [01] will of the iPad®...
Adjust Tension Specifi cations 20° 20° [09] 185.3mm 7.29 in. 2.62mm 66.7 in. 176.4mm 191.1mm 6.94 in. 7.52 in.
Page 16
English Español Milestone AV Technologies and its affi liated corporations and subsidiaries Milestone AV Technologies y sus empresas asociadas y fi liales (colectivamente (collectively, “Milestone”), intend to make this manual accurate and complete. “Milestone”) tienen la intención de que este manual sea preciso y completo. Sin However, Milestone makes no claim that the information contained herein embargo, Milestone no garantiza que la información que contiene incluya todos covers all details, conditions, or variations.
Page 17
Nederlands Svenska Milestone AV Technologies en haar aangesloten bedrijven en Milestone AV Technologies och dess dotterbolag och (tillsammans under namnet dochterondernemingen (verder samen te noemen: “MIlestone”) hebben de “Milestone”), strävar efter att göra denna bruksanvisning noggrann och komplett. intentie deze montagehandleiding zo accuraat en volledig mogelijk te maken. Milestone kan dock inte garantera att den information som ges här är fullständig Echter, Milestone claimt niet dat de informatie in deze montagehandleiding och att den täcker alla detaljer, tillstånd eller variationer.
Page 18
Česky Společnost Milestone AV Technologies a její sesterské a dceřiné společnosti (společně nazývané „Milestone“) si přejí, aby byla tato příručka přesná a úplná. Společnost Milestone nijak netvrdí, že informace, které jsou zde obsaženy, zahrnují všechny podrobnosti, podmínky nebo varianty. Ani nezajišťuje veškeré možné...
Need help?
Do you have a question about the VTM5 and is the answer not in the manual?
Questions and answers