Advertisement
Quick Links
SETTING UP YOUR OHMA ALL-IN-ONE BABY MONITOR
1. Search "Yogasleep" or scan
the QR code with your
phone or tablet's camera to
download mobile app from
the app marketplace.
1. Open the Yogasleep app
and register for a new
account. Passwords must
be at least 8 characters and
include one capital letter
and one number or symbol.
2. A verification code will
be emailed to you. When
prompted, enter the code
in the app and press
"Register."
3. You can now login to the
app by entering the email
and password that was
used to set up the account.
1. For setup, place Ohma
near your router to ensure
Ohma is able to connect to
your network.
2. Plug Ohma into the wall
using the included power
adapter.
3. An audio prompt will direct
you to complete setup in
the app.
• Supported devices: iOS
9.3.6 and later, Android 9
and later.
• The Yogasleep app is
not available on Pixel
or Windows phones at
this time.
• Ohma and the Yogasleep
app are currently only
supported for users in the
United States.
• If you did not receive a
verification code, first
check your spam folder.
• You can request a new
verification code by
restarting the Registration
process.
• Only use the power cord
that is provided with your
Ohma.
Advertisement
Summary of Contents for Yogasleep OHMA
- Page 1 SETTING UP YOUR OHMA ALL-IN-ONE BABY MONITOR • Supported devices: iOS 9.3.6 and later, Android 9 and later. • The Yogasleep app is not available on Pixel or Windows phones at this time. • Ohma and the Yogasleep app are currently only supported for users in the United States.
- Page 2 • Make sure you are in a well-lit your phone or tablet. space and your screen is at maximum brightness and 2. Place the Ohma on a hard does not auto-dim. surface and don’t move it. • Hold the QR code steady in 3.
- Page 3 • In general, we recommend 2. To adjust Ohma’s angle of placing the unit at least view, manually rotate the three feet (one meter) black camera up or down away from you or your within its housing.
-
Page 4: Troubleshooting
Perform a Factory Reset with the steps above. Ohma will wipe all previous Wi-Fi connections. • Connect your phone or tablet to the new Wi-Fi and follow the instructions above for setting up Ohma. Connecting to Wi-Fi that requires additional authentication (e.g. at a hotel) •... -
Page 5: Frequently Asked Questions
No, Ohma does not come with a mounting bracket because it does not need to be mounted. Simply place Ohma on any raised surface facing the center of the area you want to see. For cribs or beds, the ide- al placement is on a shelf or dresser that is higher than the crib or bed (so the camera has as unobstruct- ed a view of the child as possible).