Playing Back A Tape; Playing Back Other Equipment - JVC UX-G5A Instructions Manual

Playing Back a Tape

To insert a tape
You can play back type I tapes.
Push Insert
With the tape side facing backside
To start:
To rewind tape:
To change the tape running direction
To reverse the tape automatically
REV.
MODE
Tape is played from the forward side to the
reverse side. When the reverse side of the tape
reaches its end, playback stops.
Tape is automatically reversed, and playback
repeats until you stop it.
Tape will not be reversed. When the current
side of the tape reaches its end, playback stops.
12
Close
To stop:
F-PLAY: wind forward the tape.
R-PLAY: rewind the tape.
F-PLAY: rewind the tape.
R-PLAY: wind forward the tape.
3 (forward play)
2 (reverse play)

Playing Back Other Equipment

To connect other equipment
By using a stereo mini plug cord (not supplied), you can
connect equipment with analog audio output jacks such as an
MD player, or a TV, etc.
Stereo mini plug cord (not supplied)
AUX
(front panel)
If the audio output on the other equipment is not stereo
mini plug type,
Use a plug adapter to convert the stereo mini plug to the
corresponding plug of the audio output.
Refer to the manuals supplied with the other equipment.
IMPORTANT
• Always set volume to "VOL-MIN" when connecting or
disconnecting the other equipment.
To select other equipment
Remote control: Main unit:
FM/AM/AUX
AUX
Portable audio
device,
Game machine, etc.
FM
AM
AUX